Zanussi ZDI 112 manual Consumption values, Hints for test institutes

Page 21

Noise level

dB(A)

Consumption values

51

The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the var-

iations of the power supply and the amount of dishes.

Consumption values

Programme

 

Programme duration (in

Energy consumption (in

Water (litres)

 

 

minutes)

kWh)

 

Intensive 70°

 

85-95

1,8-2,0

22-25

Normal 65°

 

105-115

1,5-1,7

23-25

Eat-Load-Run 65°

 

30

0,9

9

Eco 50° (Test pro-

 

140

1,05

16

gramme for Test Insti-

 

 

 

 

tutes)

 

 

 

 

Rinse and Hold

 

12

0,1

5

 

 

 

 

 

Hints for test institutes

Testing in accordance with EN 60704 must be carried out with appliance fully loaded and us- ing the test programme (see "Consumption values").

Test in accordance with EN 50242 must be carried out when the salt container and rinse

aid dispenser have been filled with salt and rinse aid respectively and using the test pro- gramme (see "Consumption values").

Full load: 12 standard place settings

Amount of detergent required

Rinse aid setting

5 g + 25 g (Type B)

position 4 (Type III)

21

Image 21
Contents Dishwasher ZDI Contents General safety Safety informationChild safety Correct useControl panel InstallationStarting the washing programme Washing programmes First use When using tablets that integrate rinse aid and detergentSet the water softener Water hardness Mmol/lUse of salt Setting the water softener manually see table Setting the water softener electronically see tableFilling with dishwasher salt Only before filling with Filling with rinse aid Adjusting the dosage of rinse aidLoading cutlery and dishes Are of limited suitability Maximum height of the dishes Adjusting the height of the upper basketUpper basket Lower basketUse of detergent Unloading the dishwasherDetergent tablets Cleaning the filters Care and cleaningEnvironmental concerns Fault code and malfunction Possible cause and solutionSomething not working Fault code and malfunction Wash results are not satisfactory Technical dataFull load 12 standard place settings Consumption valuesHints for test institutes Installation Water inlet hose with safety valveWater connection Must be removed . Fail Drain hoseElectrical connection Fitting under a counterLevelling Page Page Page 156991060-00-19102007 Subject to change without notice