Zanussi ZDTS 101 user manual Use of rinse aid

Page 11

IMPORTANT!

Immediately start a complete programme.

IMPORTANT!

Water will overflow from the container as salt is added.

Remove any trace of salt. Replace the cap tightly turning it clockwise until it stops with a click.

IMPORTANT!

Top up the special salt when the light on the control panel illuminates.

Use of rinse aid

Open the lid.	Fill up with rinse aid. The
	maximum level for filling is
	indicated by "max"

Clean up any rinse aid which overflows. Close the lid and press until it locks.

11

Image 11

Contents Dishwasher Zdts Contents Correct use Safety informationGeneral safety Child safetyControl panel InstallationRelease the Programme selection/Can- cel button Setting modeIndicator lights Audible signalsProgramme description Washing programmesDegree of soil Type of loadSet the water softener First useUse of salt Setting the water softener manually see tableSetting the water softener electronically see table Water hardness Clarke Mmol/lUse only special salt suitable for dishwashers Use of dishwasher saltUse of rinse aid Load cutlery and dishes Adjusting the dosage of rinse aidAre of limited suitability Lower basket Adjusting the height of the upper basketMaximum height of the dishes Upper basketDetergent tablets Use of detergentUnloading the dishwasher Cleaning the spray arms Care and cleaningCleaning the filters Environment concerns What to do if… Fault code and malfunctionPossible cause and solution Wash results are not satisfactory Consumption values Technical dataHints for test institutes Full load 9 standard place settingsWater connection InstallationWater inlet hose with safety valve Must be removed . Fail Drain hoseLevelling Electrical connectionFitting under a counter Page Page Page 117972110-012008