Zanussi ZDTS 101 user manual Use of detergent, Unloading the dishwasher, Detergent tablets

Page 15

Use of detergent

IMPORTANT!

Only use detergents suitable for dishwashers.

Observe the manufacturer’s dosing and stor- age recommendations.

Open the lid.	Fill in the detergent in	Observe the dosing lev-
	compartment A.	els.

For programmes with pre-	When using detergent	Close the lid.
wash add an additional	tablets: place detergent
detergent dose in com-	tablets in compartment A.
partmentB.

Detergent tablets

Detergent tablets from different manufacturers dissolve at different rates. For this reason, some detergent tablets do not attain their full

cleaning power during short washing pro- grammes. Therefore, please use long washing programmes when using detergent tablets, to ensure the complete removal of detergent residuals.

Unloading the dishwasher

•Hot dishes are sensitive to knocks.

The dishes should therefore be allowed to cool down before removing from the appli- ance.

•Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

15

Image 15

Contents Dishwasher Zdts Contents Correct use Safety informationGeneral safety Child safetyControl panel InstallationRelease the Programme selection/Can- cel button Setting modeIndicator lights Audible signalsProgramme description Washing programmesDegree of soil Type of loadSet the water softener First useUse of salt Setting the water softener manually see tableSetting the water softener electronically see table Water hardness Clarke Mmol/lUse only special salt suitable for dishwashers Use of dishwasher saltUse of rinse aid Load cutlery and dishes Adjusting the dosage of rinse aidAre of limited suitability Lower basket Adjusting the height of the upper basketMaximum height of the dishes Upper basketUse of detergent Unloading the dishwasherDetergent tablets Care and cleaning Cleaning the filtersCleaning the spray arms Environment concerns Fault code and malfunction Possible cause and solutionWhat to do if… Wash results are not satisfactory Consumption values Technical dataHints for test institutes Full load 9 standard place settingsInstallation Water inlet hose with safety valveWater connection Must be removed . Fail Drain hoseElectrical connection Fitting under a counterLevelling Page Page Page 117972110-012008