Zanussi ZGS 682 ICT manual Maintenance and Cleaning, Hob Top, Pan Supports

Page 11

Maintenance and Cleaning

Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob from the electricity supply.

The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool.

This appliance cannot be cleaned with steam or with a steam cleaning machine.

The Hob Top

Regularly wipe over the hob top using a soft cloth well wrung out in warm water to which a little wasing up liquid has been added. Avoid the use of the following:

- household detergent and bleaches;

- impregnated pads unsuitable for non-stick saucepans;

- steel wool pads;

- bath/sink stain removers.

Should the hob top become heavily soiled, the following products are recommended:

-For stainless steel hobs use a proprietary stainless steel cleaner.

-For other hobs use Hob Brite or Bar Keepers Friend.

Do not leave acid or alkaline substances (e.g. vinegar, salt, lemon juice, etc.) on the cooktop.

Pan Supports

The enamelled pan supports are dishwasher proof. If washing them by hand, take care when drying them as the enamelling process occasionally leaves rough edges. If necessay, remove stubborn stains using a paste cleaner.

After cleaning, be sure to wipe dry with a soft cloth and make sure that the pan supports are correctly positioned.

Model ZGS 682 IC - ICT : The hob has cast iron pan supports. Take care when removing them. They are heavy and could damage the hob or your kitchen furniture if you let them fall.

YES

11

Image 11
Contents GB IE Thank you for selecting our appliance Contents During Use Important Safety InformationInstallation People SafetyEnvironmental Information ServiceDescription of the Hobs Instructions for the User Lighting OperationBurner Minimum Maximum Diameter Using the hob correctlyPage Pan Supports Maintenance and CleaningHob Top Ignition electrode BurnersSomething Not Working? Symptom SolutionEngineer technical data Instructions for the InstallerBurner Provision for Ventilation Important safety requirementsInstallation Gas Connection Location Fitting the Hob into Worktop Building over a kitchen unit with door BuildingBuilding over a cupboard or drawer Electrical Requirements Electrical ConnectionsPermanent Connection Wiring diagramPreliminary Electrical Systems Check Fault FindingEarth Continuity Check Ignition System / Gas Ignition Commissioning Pressure TestingProcedure Minimum adjustmentMethod Conversion from Natural Gas to LPGExclusions Guarantee/Customer Service0870 5 929 Service and Spare PartsEuropean Guarantee Page Page Page Page 35699-4701 01/08 R.0