Zanussi ZGS 682 ICT manual Something Not Working?, Symptom Solution

Page 13

Something Not Working?

If the hob is not working correctly, please carry out the following checks before contacting your local Service Force Centre.

SYMPTOM

 

SOLUTION

„ There is no spark when

‹

Check that the unit is plugged

lighting the gas.

 

in and the electrical supply is

 

 

switched on.

 

‹ Check that the RCCB has not

 

 

tripped (if fitted).

 

‹

Check the mains fuse has not

 

 

blown.

 

‹

Check the burner cap and

 

 

crown have been replaced

 

 

correctly, e.g. after cleaning.

„ The gas ring burns unevenly.

‹

Check the main jet is not

 

 

blocked and the burner crown

 

 

is clear of food particles.

 

‹

Check the burner cap and

 

 

crown have been replaced

 

 

correctly, e.g. after cleaning.

 

 

 

If after all these checks, your hob still does not operate correctly, contact your local Service Force Centre.

Please note that it will be necessary to provide proof of purchase for any in- guarantee service calls.

In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.

13

Image 13
Contents GB IE Thank you for selecting our appliance Contents Installation Important Safety InformationPeople Safety During UseEnvironmental Information ServiceDescription of the Hobs Instructions for the User Lighting OperationBurner Minimum Maximum Diameter Using the hob correctlyPage Hob Top Maintenance and CleaningPan Supports Ignition electrode BurnersSomething Not Working? Symptom SolutionEngineer technical data Instructions for the InstallerBurner Provision for Ventilation Important safety requirementsInstallation Gas Connection Location Fitting the Hob into Worktop Building over a cupboard or drawer BuildingBuilding over a kitchen unit with door Electrical Requirements Electrical ConnectionsPermanent Connection Wiring diagramPreliminary Electrical Systems Check Fault FindingEarth Continuity Check Ignition System / Gas Ignition Procedure Pressure TestingMinimum adjustment CommissioningMethod Conversion from Natural Gas to LPGExclusions Guarantee/Customer Service0870 5 929 Service and Spare PartsEuropean Guarantee Page Page Page Page 35699-4701 01/08 R.0