THE OVEN LIGHTS
The oven light illuminates the main oven when the
Selector is turned to .
The top oven light illuminates when the oven temperature control is turned.
REPLACING AN OVEN LIGHT BULB
Isolate the appliance from the electricity supply before replacing the bulb.
The type of bulb required is a 300°C, 25 watt small Edison Screw.
1.Make sure the appliance is cool before you replace a bulb
2.Open the door and remove the shelves, and wirework runners.
Instructions on how to remove the wirework runners are given on page 44.
3.Pull the glass bulb cover towards you and then pull it off. If necessary use a screwdriver to carefully lever off the cover, taking care not to damage the oven cavity.
4.Unscrew the bulb by turning it to the left.
5.Fit a new bulb and then replace the glass bulb cover.
6.Refit the wirework runners and replace the oven shelves
7.Restore the appliance to the electricity supply and reset the time of day.
45