Sherwood P-965 manual Connecting MULTI-ROOM System KIT

Page 12

ENGLISH

9. CONNECTING MULTI-ROOM SYSTEM KIT

•The multi-room system kit(sold separately ) is essential for operation from a remote location .

For information on the multi-room system kit, contact the Xantech corporation at 1-800-843-5465 or www.xantech.com.

•IR IN jack allow you to control this unit from another room with the remote control unit.

•To control this unit from another room with the remote control unit, connect the IR IN jack to the output of the connecting block.

•If this unit is located inside a cabinet or other enclosure where the infrared beams from the remote control unit cannot enter, then operation with the remote control unit will not be possible. In such a case, connect the IR IN jack to the output of the connecting block.

•To control other compatible component from another room with the universal remote control unit, connect the IR OUT jack to the IR emitter.

Note:

•Remote operation may become unreliable if the IR receiver is exposed to strong light such as direct sunlight or inverted fluorescent.

Main room

Another room(Room 2)

Connecting block (Multi-room system kit)

output

IR receiver (Multi-room system kit)

This unit DVD player

IR emitter (Multi-room system kit)

•When this unit is located inside a cabinet.

In the cabinet

output

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connecting block

IR receiver

(Multi-room system kit)

(Multi-room system kit)

This unit

10. CONNECTING MICROPHONE

•To use Auto Speaker Setup function, connect the

supplied microphone to the SETUP MIC jack.(For details, refer to “When selecting the AUTO SPEAKER SETUP” on page 49.)

Notes:

• Because the microphone for Auto Speaker Setup is

 

Microphone

 

designed for use with this receiver, do not use a

 

 

 

microphone other than the one supplied with this unit.

 

 

•After you have completed the auto speaker setup procedure, disconnect the microphone.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 965 Introduction Read this Before Operating Your UnitSafety Instruction Contents Connecting Antennas System ConnectionsConnecting Audio Components Component video input default settings Video 1 Video deck, DVD recorder, etcDigital input default settings USB audio connectionConnecting 8CH Direct INs Speaker placement Front left and right speakers and center speakerConnecting System Control Room 2 connectionsConnecting MULTI-ROOM System KIT Connecting PC for Upgrades Front Panel Controls Dolby PL II Music ParameterFluorescent Display Universal Remote Controls Digi Link system remote controlsFunction Table of the Numbered Buttons TapePlay PLAY/PAUSE Remote Control Operation Range Loading BatteriesEntering a Setup Code Enter the 3 digit setup code aiming Room 2 Remote Controls Remote Control Operation RangeOperations Before operationWhen CD, AUX or Video 1~ Video 6 is selected Adjusting the tone bass and trebleMuting the sound Listening with the headphones Achieving higher purity of sound qualityCompensating for edgy or shrill movie sound tracks Surround Sound Surround modesDolby Pro Logic IIx surround Front L/R Center Enjoying Surround Sound DSP DSP2CH downmix mode To listen in a Dolby Pro Logic IIx modeTo listen in a Dolby Virtual Speaker mode Selecting the surround back channel mode as connected To listen in a Dolby Headphone modeAdjusting each channel level with test tone Adjusting the current channel levelsAdjust the level of the selected channel as Desired Auto tuning Manual tuningAuto presetting Manual presetting Tuning to preset stationsScanning preset stations in sequence Listening to FM stereo broadcastsDubbing the sound and image signals RecordingRecording with Tape Monitor Dubbing from video components ontoDigital Audio Recording with MD Recorder Operating the sleep timer Adjusting the brightness Other FunctionsCompressing the dynamic range Dolby Digital sources onlyEntering a label Correcting or clearing a labelRoom 2 Source Playback Press the Room 2 buttonUsing the OSD OSD Menu SettingsCurrent Status Display When selecting the Speaker Setup Setting the Speaker Setup When selecting the Speaker ConfigurationWhen selecting the Speaker Distance When selecting the Virtual Speaker Setup Virtual Speaker mode changes as followsWhen selecting the Subwoofer When selecting the Subwoofer Mode When selecting the Crossover FrequencyWhen selecting the Auto Speaker Setup PreparationsVOL Main FAV Setting the System Setup When selecting the Digital Input SetupWhen selecting the Tone Control When Cinema EQ mode is selectedWhen Tone Defeat mode is selected When selecting the OSD Auto Display When selecting the Current VideoWhen selecting the Component Video Setup VideoWhen selecting the Video 2 OUT When selecting the DC Trigger 2 SetupWhen the DC Trigger 2 mode is set to On When selecting the Digital RE-MASTERINGWhen selecting the A/V Sync Setting the Surround Setup When Decoding Mode is selectedWhen the Surround Mode is selected When the Dolby surround mode is selectedWhen the Dynamic Range is selected When selecting the Panorama mode When selecting the Center Width controlWhen selecting the Dimension control Setting the CH Level Setup When selecting the Preset 1 orWhen selecting the Preset 1 Trim or Preset 2 Trim When selecting the Channel Level Trim When selecting the LFE Level Trim Setting the ROOM2 Feed Setup When selecting the Volume ModeWhen selecting the Room 2 Feed mode When the Room 2 Feed mode is set to OnTroubleshooting Guide Problem Possible Cause RemedySpecifications PRE Amplifier Section965

P-965 specifications

The Sherwood P-965 is a well-regarded stereo receiver that offers a blend of classic design, modern features, and solid performance, making it an excellent choice for audiophiles and casual listeners alike. With its robust build and versatile functionality, the P-965 stands out in the competitive landscape of home audio equipment.

One of the main features of the Sherwood P-965 is its power output, which typically delivers around 100 watts per channel at an 8-ohm load. This allows it to drive a wide range of speakers, providing clear and powerful sound reproduction across various musical genres. The receiver also supports multiple speaker configurations, enabling users to connect various setups to suit their listening preferences.

The P-965 utilizes advanced technology to enhance its audio capabilities. It features a built-in digital-to-analog converter (DAC) that ensures high-quality audio playback from digital sources. This is complemented by a wide array of connectivity options, including multiple analog inputs, optical and coaxial digital inputs, and even USB compatibility for direct connection to computers or USB drives. This versatility makes it easy for users to integrate the receiver into their existing audio setups.

Another key aspect of the Sherwood P-965 is its onboard AM/FM tuner, which allows users to enjoy their favorite radio stations effortlessly. The tuner is equipped with presets for quick access to frequently used channels, adding to the overall convenience of the device. Additionally, it includes an integrated equalizer that enables users to customize their sound experience to match their preferences and room acoustics.

The design of the Sherwood P-965 is both functional and aesthetically pleasing. Its classic look features a sturdy chassis and a user-friendly front panel with well-placed knobs and buttons. The display is clear and easy to read, providing essential information about current settings and input sources.

In conclusion, the Sherwood P-965 receiver combines powerful audio performance, modern connectivity, and user-friendly features in a stylish package. Its versatility makes it suitable for a wide range of applications, whether in a home theater system or a dedicated music listening setup, making it a worthy consideration for anyone seeking to enhance their audio experience. With its rich array of features and reliable performance, the Sherwood P-965 continues to maintain its reputation in the world of audio equipment.
Top Page Image Contents