Sherwood P-965 manual Operations, Before operation

Page 23

Operations

Notes : • Before operating this unit with the supplied remote control, refer to “ Universal Remote Controls” on page 16 for details about operation.

•Before operating this unit, first set this unit as desired for optimum performance, doing the OSD menu setting procedures. (For details, refer to “OSD Menu Settings” on page 42.)

ENGLISH

LISTENING TO A PROGRAM SOURCE

Before operation

• Enter the standby mode.

• The STANDBY button lights up in amber. This means that the unit is not disconnected from the AC mains and a small amount of current is retained to support the operation readiness.

•To switch the power off, push the POWER switch again.

•Then power is cut off and the STANDBY button goes off.

In the standby mode, turn the power on.

1

STANDBY

POWER ON

or

1 2 3

4 5 6

7 8 9

0

•Each time the STANDBY button on the front panel is pressed, the unit is turned on to enter the operating mode (the STANDBY button lights up in blue) or off to enter the standby mode(the STANDBY button lights up in amber).

•On the remote control, press the POWER ON button to enter the operating mode or press the STANDBY button to enter the standby mode.

•In the standby mode if the INPUT SELECTOR button is pressed, the unit is turned on automatically and the desired input is selected.

Switch the speakers on.

2

•Then the SPEAKER indicator ( ) lights up and the sound can be heard from the speakers.

•When using the headphones for private listening, press this button again to switch the speakers off,

then the SPEAKER indicator ( ) goes off(speaker off mode).

Select the desired input source.

3

STANDBY

POWER ON

 

 

AUD1

 

 

TUNER

VID1

 

CD

VID2

 

T.MON

VID3

 

AUX

VID4

or

PHONO

VID5

PAGE1

•Each time the “AUDIO” button is pressed, the input source changes as follows:

PHONO TUNER CD AUX

(frequency display)

•Each time the “VIDEO” button is pressed, the input source changes as follows:

VIDEO 1 VIDEO 2 ------- VIDEO 6

•When the TAPE MONITOR button is set to on so that “TAPE MON” lights up, other inputs can not be heard from the speakers.

To listen to an input source except TAPE MONITOR, be sure to set the TAPE MONITOR button to off.

TAPE MONITOR function

You can connect either a tape deck or a graphic equalizer to the unit’s TAPE MONITOR jacks.

Only when you listen to the component connected to these jacks, set the TAPE MONITOR button to on.

If you connect a 3-head tape deck, you can listen to the sound being recorded during recording, not the source sound.

For further details, refer to the operating instructions of the component connected.

When selecting the 8 CH DIRECT as desired

8CH DIRECT

STANDBY

POWER ON

 

 

 

AUD1

 

 

VID6

7.1IN

 

DTS

PL2MV

or

DOLBY

PL2MS

PCM

NEO6C

MPEG NEO6M

PAGE2

•Depending on the surround back speaker setting, “8(,7 or 6) CH DIRECT” is displayed and the 8(/7/6) separate analog signals from the component connected to this input pass through the tone, volume and bass management(if selected) circuits only and can be heard from your speakers.(In case that the TAPE MONITOR button is set to on, the TAPE MONITOR button is automatically set to off.)

•Press the 8 CH DIRECT button or select the desired input source to cancel the 8 CH direct function.

•These analog signals can be heard only. They cannot be recorded.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents 965 Read this Before Operating Your Unit IntroductionSafety Instruction Contents System Connections Connecting AntennasConnecting Audio Components Video 1 Video deck, DVD recorder, etc Component video input default settingsUSB audio connection Digital input default settingsConnecting 8CH Direct INs Front left and right speakers and center speaker Speaker placementRoom 2 connections Connecting System ControlConnecting MULTI-ROOM System KIT Connecting PC for Upgrades Dolby PL II Music Parameter Front Panel ControlsFluorescent Display Digi Link system remote controls Universal Remote ControlsTape Function Table of the Numbered ButtonsPlay PLAY/PAUSE Loading Batteries Remote Control Operation RangeEntering a Setup Code Enter the 3 digit setup code aiming Remote Control Operation Range Room 2 Remote ControlsBefore operation OperationsAdjusting the tone bass and treble When CD, AUX or Video 1~ Video 6 is selectedCompensating for edgy or shrill movie sound tracks Muting the sound Listening with the headphonesAchieving higher purity of sound quality Surround modes Surround SoundDolby Pro Logic IIx surround Front L/R Center DSP DSP Enjoying Surround SoundTo listen in a Dolby Virtual Speaker mode 2CH downmix modeTo listen in a Dolby Pro Logic IIx mode To listen in a Dolby Headphone mode Selecting the surround back channel mode as connectedAdjusting the current channel levels Adjusting each channel level with test toneAdjust the level of the selected channel as Desired Auto presetting Auto tuningManual tuning Tuning to preset stations Manual presettingListening to FM stereo broadcasts Scanning preset stations in sequenceDubbing from video components onto Dubbing the sound and image signalsRecording Recording with Tape MonitorDigital Audio Recording with MD Recorder Dolby Digital sources only Operating the sleep timer Adjusting the brightnessOther Functions Compressing the dynamic rangeCorrecting or clearing a label Entering a labelPress the Room 2 button Room 2 Source PlaybackCurrent Status Display Using the OSDOSD Menu Settings When selecting the Speaker Setup When selecting the Speaker Configuration Setting the Speaker SetupWhen selecting the Speaker Distance Virtual Speaker mode changes as follows When selecting the Virtual Speaker SetupWhen selecting the Subwoofer When selecting the Crossover Frequency When selecting the Subwoofer ModePreparations When selecting the Auto Speaker SetupVOL Main FAV When selecting the Digital Input Setup Setting the System SetupWhen Tone Defeat mode is selected When selecting the Tone ControlWhen Cinema EQ mode is selected When selecting the Current Video When selecting the OSD Auto DisplayVideo When selecting the Component Video SetupWhen selecting the DC Trigger 2 Setup When selecting the Video 2 OUTWhen selecting the Digital RE-MASTERING When the DC Trigger 2 mode is set to OnWhen selecting the A/V Sync When Decoding Mode is selected Setting the Surround SetupWhen the Dynamic Range is selected When the Surround Mode is selectedWhen the Dolby surround mode is selected When selecting the Dimension control When selecting the Panorama modeWhen selecting the Center Width control When selecting the Preset 1 Trim or Preset 2 Trim Setting the CH Level SetupWhen selecting the Preset 1 or When selecting the Channel Level Trim When selecting the LFE Level Trim When selecting the Volume Mode Setting the ROOM2 Feed SetupWhen the Room 2 Feed mode is set to On When selecting the Room 2 Feed modeProblem Possible Cause Remedy Troubleshooting GuidePRE Amplifier Section Specifications965

P-965 specifications

The Sherwood P-965 is a well-regarded stereo receiver that offers a blend of classic design, modern features, and solid performance, making it an excellent choice for audiophiles and casual listeners alike. With its robust build and versatile functionality, the P-965 stands out in the competitive landscape of home audio equipment.

One of the main features of the Sherwood P-965 is its power output, which typically delivers around 100 watts per channel at an 8-ohm load. This allows it to drive a wide range of speakers, providing clear and powerful sound reproduction across various musical genres. The receiver also supports multiple speaker configurations, enabling users to connect various setups to suit their listening preferences.

The P-965 utilizes advanced technology to enhance its audio capabilities. It features a built-in digital-to-analog converter (DAC) that ensures high-quality audio playback from digital sources. This is complemented by a wide array of connectivity options, including multiple analog inputs, optical and coaxial digital inputs, and even USB compatibility for direct connection to computers or USB drives. This versatility makes it easy for users to integrate the receiver into their existing audio setups.

Another key aspect of the Sherwood P-965 is its onboard AM/FM tuner, which allows users to enjoy their favorite radio stations effortlessly. The tuner is equipped with presets for quick access to frequently used channels, adding to the overall convenience of the device. Additionally, it includes an integrated equalizer that enables users to customize their sound experience to match their preferences and room acoustics.

The design of the Sherwood P-965 is both functional and aesthetically pleasing. Its classic look features a sturdy chassis and a user-friendly front panel with well-placed knobs and buttons. The display is clear and easy to read, providing essential information about current settings and input sources.

In conclusion, the Sherwood P-965 receiver combines powerful audio performance, modern connectivity, and user-friendly features in a stylish package. Its versatility makes it suitable for a wide range of applications, whether in a home theater system or a dedicated music listening setup, making it a worthy consideration for anyone seeking to enhance their audio experience. With its rich array of features and reliable performance, the Sherwood P-965 continues to maintain its reputation in the world of audio equipment.
Top Page Image Contents