![](/images/new-backgrounds/1038026/3802637x1.webp)
OPERATING COMPONENTS WITH REMOTE CONTROL
Enter the setup code of the components
1 respectively, referring to “ENTERING A SETUP CODE” (page 20).
Turn on the components you want to
2 operate.
Select the device on the main menu of the
3 remote control corresponding to the component you want to operate.
Example) When selecting “AUD 1” or “AUD 2” to operate this unit.
STANDBYPOWER ON
MAIN |
|
|
AUD1 | AUD2 |
|
CD | TV |
|
DVD | VCR |
|
TAPE | SAT |
|
AUX | CABLE |
|
AUD1 | The device selected presently |
•Then the page menu of the selected device will be displayed.
Press the button corresponding to the
4 operation you want while aiming the remote control at the REMOTE SENSOR on the component.
REMOTE CONTROL OPERATION RANGE
•Use the remote control within a range of about 7 meters (23 feet) and angles of up to 30 degrees aiming at the remote sensor.
PAGE | MAIN | FAV |
VOL |
|
|
1 2 3
4 5 6
7 8 9
0
MI M2 M3
LOADING BATTERIES
• When the remote control does not operate or “LOW BATTERY” is displayed on the LCD screen, etc., the old batteries should be replaced.
ENGLISH
•When operating a Sherwood CD player or tape deck using the system remote control, aim the remote control at the REMOTE SENSOR on this unit.
•However, in case of Sherwood DVD player or TV, aim it at the REMOTE SENSOR on the corresponding component.
In case of selecting a function on the page menu of the selected device.
1
Remove the cover.
•Find a function with pressing the PAGE button repeatedly and then press the button corresponding to the desired function.
Example) when selecting a function on the AUD 1’s page menu.
Functions on the page 1Functions on the page 2
AUD1 |
|
| AUD1 |
|
|
|
|
|
|
TUNER | VID1 | VID6 | 7.1IN | |
CD | VID2 | DTS | PL2MV | |
T.MON | VID3 | DOLBY | PL2MS | |
AUX | VID4 | PCM | NOE6C | |
PHONO | VID5 | MPEG | NEO6M | |
|
|
| ||
PAGE1 | PAGE2 |
2 | Load four alkaline batteries (“AAA” size, |
1.5V) matching the polarity. |
19