Note: When the automatic timed period starts, the oven indicator neon will cycle ON and OFF during cooking.
B)TO SET THE TIMER TO SWITCH OFF ONLY
i)Ensure the electricity supply is switched ON and that the correct time of day is displayed, e.g. 10.00 a.m. as Fig. 9.
ii)Place food in oven.
iii)To set the length of cooking time, press the
cooking hours button ( 
) depress the increase control ( + ) until the required length of cooking time is displayed, e.g. 2 hrs 15 mins as Fig. 10. Depress the decrease control ( - ) if necessary.
iv)Release the buttons. The AUTO display will glow and the time of day will be displayed after 5 seconds.
v)Set the oven temperature and select the required function. The oven indicator neon should be ON.
vi)To check the stop time during the cooking
period, simply press the stop time button ( ) and the stop time will be displayed, as Fig. 11.
4.TO RETURN THE COOKER TO MANUAL OPERATION
To cancel an automatic programme, or return the cooker to manual operation, follow the steps given below.
At the end of a timed cooking period, the AUTO light will flash and a bleeper will sound for up to 2 minutes. This can be stopped by pressing any of the 4 left hand side buttons as Fig. 12.
Turn oven control and selector to the OFF position. The AUTO display will continue to flash.
Press ( ) button. The AUTO display will go out as Fig. 13.
Turn the oven control and selector ON to check that the oven operates manually. The oven indicator neon will glow.
Turn all oven controls OFF. No indicator neons should be lit.
Fig. 9
A
U
T
O
Fig. 10
A
U
T
O
Fig. 11
Fig. 12
Fig. 13
21