CONTROLS
IQ-TouchTM
A red indicator light will be illuminated above most active features.
Touch the icon to activate the options below.
quick ice | Increases the production of ice |
water filter | Press and hold for three (3) seconds to reset after |
| filter change. |
C/F | Touch to toggle display from Fahrenheit to Celsius. |
default settings | Resets all refrigerator settings such as temp, temp |
| display and tones to their factory default settings. |
Power | Press and hold for three (3) seconds to turn off the |
| cooling system to clean the refrigerator. It also turns off |
| the ice maker. The temperature displays will read OFF. |
Energy Saver Keep this switch set on energy saver (light on) for lowest energy usage. If moisture appears on the cabinet between the doors, pressing this button will turn the light off and enable an electric heater used to reduce moisture on the cabinet between the doors.
IMPORTANT
Pressing the system
Setting cooling temperatures
Press the “∧” or “∨” indicator to adjust the temperature to the desired setting.
The temperature display will begin to blink with the first touch. The display will time out after 10 seconds and return to the basic display.
Alarms
Door Ajar If the door has been left open for an extended period of time, an alarm will sound and the door ajar indicator will display on the bottom display of the control panel. The alarm is turned off by closing the door. The mute sounds key will blink to prompt the reset of any active alarms. Press this key to reset any system alarms.
High Temp In the event of a high temperature condition, the tem- perature display will blink and display “HI”. After 20 min- utes, the alarm will sound and the high temp indicator will be red on the bottom of the control panel. The mute sounds icon will illuminate until pressed, acknowledging the alarm, at which time the highest temperature reached will be displayed and the refrigerator will resume normal operation. In case the high temp alarm is not acknowl- edged at the first alarm sound time out, when the door is first opened, the alarm sound will be repeated.
Power Fail In the event of a power failure, the power fail alert will be displayed and the temperature display will blink until the mute sounds icon is pressed, acknowledging the alarm. Other modes may be turned off until the alarm is acknowledged. The power fail alert is turned off and the refrigerator will resume normal operation. The high temp alarm may also be illuminated until a safe operating range temperature has been reached.
15