STORAGE FEATURES
CAUTION
To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change. Allow the glass shelves to stabilize to room temperature before cleaning. Do not wash in dishwasher.
NOTE
Features may vary according to model.
Your refrigerator includes SpillSafeTM glass shelves that are designed to catch and hold accidental spills.
You can easily adjust shelf positions in the fresh food compartments to suit your needs. The shelves have mounting brackets that attach to slotted supports at the rear of each compartment.
To change the position of a shelf:
1Remove all food from the shelf.
2Lift the front edge up and pull the shelf out.
3Replace by inserting the mounting bracket hooks into the desired support slots.
4Lower the shelf and lock into position.
Shelf features
Full SpillSafeTM Shelf
Half SpillSafeTM Shelf
Drawers
Your refrigerator includes a variety of storage drawers. These drawers are located in fixed positions at the bottom of the fresh food compartment.
Crispers
Crisper drawers are designed for storing fruits, vegetables, and other fresh produce.
Opening Crisper Drawer
Crisper humidity control
Crisper drawers include a sliding control for adjusting the humidity inside the crisper. Leafy vegetables keep best when stored with the Humidity Control set on Higher Humidity. Fresh fruits keep best when stored with the Humidity Control set on Lower Humidity.
Vegetables | Fruits |
hi | lo |
humidity control |
|
Higher Lower
Humidity Humidity
Adjusting Crisper Humidity
To remove the Crisper Drawer for cleaning:
1Pull the drawer out until it stops.
2Lift the front slightly and remove the drawer.
Removing Crisper Drawer
18