Electrolux C75301K operating instructions Stop+Go Function

Page 19

Operating Instructions

Stop+Go Function

By touching the "Stop+Go" sensor field, all cooking zones in use can be switched simultaneously to the "keep warm“ setting. The "keep warm“ setting is indicated on the display by a V symbol.

If the "Stop+Go" sensor field is touched again, the previously selected settings are restored.

3 The Timer is unaffected by the "Stop+Go" function.

If an automatic warm-up function was selected with warm-up phase A, this is stopped by the "Stop+Go" function , and is re-started when the "Stop+Go" sensor field is pressed again.

The "keep warm“ function is limited to 60 minutes, i.e. after this time the cooking zone is finally switched off.

55

Image 19

Contents C75301K Dear customer Following symbols are used in the textPlease read these operating instructions carefully Contents Page Please contact your local customer centre or your dealer SafetyElectrical Safety Child SafetySafety When Cleaning Safety During UseSwitch off the cooking zones after use To Avoid damaging your appliance Appliance must not be disposed of with household rubbish DisposalDisposing of the packaging material Information on disposalKey Features of Your Appliance Description of the hob Digital Display Cooking Zone Safety Cut-outCancelling the Safety Cut-out Switching Off for Other ReasonsBe damaged Before Using for the First TimeInitial Cleaning Wipe the ceramic glass surface with a damp clothFunction or the life of the appliance Switching On the ApplianceOperating the Hob Touch Control Sensor FieldCooking Zone Selection Switching Off the ApplianceCooking zone is finally switched off Heat Setting Selection +Keep Warm Switching the Casserole Zone On and Off Switching the Triple Ring Cooking Zone On and Off Operating Instructions Stop+Go Function Cooking zone display Switching off a Cooking ZoneIndicator only goes out when the cooking zone is cold Residual Heat IndicatorIs a risk of burns Cooking with the Automatic Warm up Function Energy Lower setting, the warm up time ends at onceSwitching off a cooking zone Cooking without the Automatic Warm up FunctionTimer Minute Minder Using the timer to measure short periods of timeEnding the timer function prematurely Displaying the remaining cooking timePans Uses, Tables and TipsEnergy saving tips General notes Advice on Cooking with and without Automatic Warm upAutomatic warm up function is suitable for Automatic warm up function is not suitable forAt an appropriate lower heat setting Typical Heat SettingsStubborn Soiling Cleaning and CareHob Light SoilingHob Frame Problem DirtWhat to do if Rectifying faultsWhat do I do if Is shown in the display? Cooking zone cannot be switched off?Cooking zone cannot be switched on? Check whether Lock is activatedHeating element voltage Technical Data Appliance dimensionsCut-out dimensions Power consumptionRegulations, Standards, Directives Safety Instructions for the Installer Tions and the terminal screws tightened securely Electrical ConnectionInstallation Instructions Installation Instructions When do you incur costs even during the warranty period? Is it a technical fault?Assembly 117 Removal 119 Salvo modificaciones