Electrolux C75301K Electrical Connection, Tions and the terminal screws tightened securely

Page 36

Installation Instructions

Electrical Connection

 

Before connecting, check that the nominal voltage of the appliance,

 

that is the voltage stated on the rating plate, corresponds to the avail-

 

able supply voltage. The rating plate is located on the lower casing of

 

the hob.

 

The heating element voltage is AC230 V ~. The appliance also works

 

perfectly on older networks with AC220 V ~.

 

The hob is to be connected to the mains using a device that allows the

 

appliance to be disconnected from the mains at all poles with a contact

 

opening width of at least 3 mm, eg. automatic line protecting cut-

 

out,earth leakage tripsorfuse.

 

A type H05VV-F cable or one with a higher grade must be used as the

 

mains connecting cable.

 

The connection must be carried out as shown in the diagram. The con-

 

necting links should be fitted according to the appropriate connection

 

diagram. The earth lead is connected to terminal x. The earth lead

 

must be longer than leads carrying electric current.

 

The cable connections must be made in accordance with regula-

 

tions and the terminal screws tightened securely.

 

Finally, the connecting cable is to be secured with the mains cable cleat

 

and the covering closed by pressing firmly (lock into place).

 

Before switching on for the first time, any protective foil or stickers

 

must be removed from the glass ceramic surface.

1

Once connected to the mains supply check that all cooking zones are

 

ready for use by briefly switching each on in turn at the maximum set-

ting.

72

Image 36
Contents C75301K Following symbols are used in the text Dear customerPlease read these operating instructions carefully Contents Page Safety Electrical SafetyChild Safety Please contact your local customer centre or your dealerSafety During Use Safety When CleaningSwitch off the cooking zones after use To Avoid damaging your appliance Disposal Disposing of the packaging materialInformation on disposal Appliance must not be disposed of with household rubbishKey Features of Your Appliance Description of the hob Cooking Zone Safety Cut-out Cancelling the Safety Cut-outSwitching Off for Other Reasons Digital DisplayBefore Using for the First Time Initial CleaningWipe the ceramic glass surface with a damp cloth Be damagedSwitching On the Appliance Operating the HobTouch Control Sensor Field Function or the life of the applianceSwitching Off the Appliance Cooking Zone SelectionHeat Setting Selection + Cooking zone is finally switched offKeep Warm Switching the Casserole Zone On and Off Switching the Triple Ring Cooking Zone On and Off Operating Instructions Stop+Go Function Switching off a Cooking Zone Cooking zone displayResidual Heat Indicator Indicator only goes out when the cooking zone is coldIs a risk of burns Cooking with the Automatic Warm up Function Lower setting, the warm up time ends at once Switching off a cooking zoneCooking without the Automatic Warm up Function EnergyTimer Using the timer to measure short periods of time Ending the timer function prematurelyDisplaying the remaining cooking time Minute MinderUses, Tables and Tips PansEnergy saving tips Advice on Cooking with and without Automatic Warm up Automatic warm up function is suitable forAutomatic warm up function is not suitable for General notesTypical Heat Settings At an appropriate lower heat settingCleaning and Care HobLight Soiling Stubborn SoilingProblem Dirt Hob FrameRectifying faults What to do ifWhat do I do if Cooking zone cannot be switched off? Cooking zone cannot be switched on?Check whether Lock is activated Is shown in the display?Technical Data Appliance dimensions Cut-out dimensionsPower consumption Heating element voltageRegulations, Standards, Directives Safety Instructions for the Installer Electrical Connection Tions and the terminal screws tightened securelyInstallation Instructions Installation Instructions Is it a technical fault? When do you incur costs even during the warranty period?Assembly 117 Removal 119 Salvo modificaciones