Electrolux C75301K operating instructions Switching off a Cooking Zone, Cooking zone display

Page 20

Operating Instructions

Switching off a Cooking Zone

1.Select the required cooking zone with the cooking zone sensor fields.

2.Touch sensor fields + and - simultaneously to switch off or turn sen- sor field - back to zero.

3	A cooking zone may only be switched off when the decimal point is on
	in the cooking zone display.

56

Image 20

Contents C75301K Please read these operating instructions carefully Following symbols are used in the textDear customer Contents Page Safety Electrical SafetyChild Safety Please contact your local customer centre or your dealerSwitch off the cooking zones after use Safety During UseSafety When Cleaning To Avoid damaging your appliance Disposal Disposing of the packaging materialInformation on disposal Appliance must not be disposed of with household rubbishKey Features of Your Appliance Description of the hob Cooking Zone Safety Cut-out Cancelling the Safety Cut-outSwitching Off for Other Reasons Digital DisplayBefore Using for the First Time Initial CleaningWipe the ceramic glass surface with a damp cloth Be damagedSwitching On the Appliance Operating the HobTouch Control Sensor Field Function or the life of the applianceSwitching Off the Appliance Cooking Zone SelectionKeep Warm Heat Setting Selection +Cooking zone is finally switched off Switching the Casserole Zone On and Off Switching the Triple Ring Cooking Zone On and Off Operating Instructions Stop+Go Function Switching off a Cooking Zone Cooking zone displayIs a risk of burns Residual Heat IndicatorIndicator only goes out when the cooking zone is cold Cooking with the Automatic Warm up Function Lower setting, the warm up time ends at once Switching off a cooking zoneCooking without the Automatic Warm up Function EnergyTimer Using the timer to measure short periods of time Ending the timer function prematurelyDisplaying the remaining cooking time Minute MinderEnergy saving tips Uses, Tables and TipsPans Advice on Cooking with and without Automatic Warm up Automatic warm up function is suitable forAutomatic warm up function is not suitable for General notesTypical Heat Settings At an appropriate lower heat settingCleaning and Care HobLight Soiling Stubborn SoilingProblem Dirt Hob FrameWhat do I do if Rectifying faultsWhat to do if Cooking zone cannot be switched off? Cooking zone cannot be switched on?Check whether Lock is activated Is shown in the display?Technical Data Appliance dimensions Cut-out dimensionsPower consumption Heating element voltageRegulations, Standards, Directives Safety Instructions for the Installer Electrical Connection Tions and the terminal screws tightened securelyInstallation Instructions Installation Instructions Is it a technical fault? When do you incur costs even during the warranty period?Assembly 117 Removal 119 Salvo modificaciones