Electrolux C75301K operating instructions Cooking with the Automatic Warm up Function

Page 22

Operating Instructions

Cooking with the Automatic Warm up Function

All four of the hob's cooking zones can be controlled in nine stages and have an automatic warm up function:

–!, lowest heat setting

–), highest heat setting

–a, automatic warm up function

When you select the required heat setting using the + sensor field, the cooking zone will work for a specific time on full power and then switch automatically to the set heat setting.

The duration of the automatic warm up function depends on the heat setting selected.

Select the required cooking zone with the cooking zone sensor fields.

Touch sensor field + until it reaches the required heat ! to (. The set heat setting will be displayed first. After five seconds a (= auto- matic warm up function) will replace the heat setting in the display. At the end of the warm up time the heat setting will be shown again.

58

Image 22

Contents C75301K Dear customer Following symbols are used in the textPlease read these operating instructions carefully Contents Page Child Safety SafetyElectrical Safety Please contact your local customer centre or your dealerSafety When Cleaning Safety During UseSwitch off the cooking zones after use To Avoid damaging your appliance Information on disposal DisposalDisposing of the packaging material Appliance must not be disposed of with household rubbishKey Features of Your Appliance Description of the hob Switching Off for Other Reasons Cooking Zone Safety Cut-outCancelling the Safety Cut-out Digital DisplayWipe the ceramic glass surface with a damp cloth Before Using for the First TimeInitial Cleaning Be damagedTouch Control Sensor Field Switching On the ApplianceOperating the Hob Function or the life of the applianceSwitching Off the Appliance Cooking Zone SelectionCooking zone is finally switched off Heat Setting Selection +Keep Warm Switching the Casserole Zone On and Off Switching the Triple Ring Cooking Zone On and Off Operating Instructions Stop+Go Function Switching off a Cooking Zone Cooking zone displayIndicator only goes out when the cooking zone is cold Residual Heat IndicatorIs a risk of burns Cooking with the Automatic Warm up Function Cooking without the Automatic Warm up Function Lower setting, the warm up time ends at onceSwitching off a cooking zone EnergyTimer Displaying the remaining cooking time Using the timer to measure short periods of timeEnding the timer function prematurely Minute MinderPans Uses, Tables and TipsEnergy saving tips Automatic warm up function is not suitable for Advice on Cooking with and without Automatic Warm upAutomatic warm up function is suitable for General notesTypical Heat Settings At an appropriate lower heat settingLight Soiling Cleaning and CareHob Stubborn SoilingProblem Dirt Hob FrameWhat to do if Rectifying faultsWhat do I do if Check whether Lock is activated Cooking zone cannot be switched off?Cooking zone cannot be switched on? Is shown in the display?Power consumption Technical Data Appliance dimensionsCut-out dimensions Heating element voltageRegulations, Standards, Directives Safety Instructions for the Installer Electrical Connection Tions and the terminal screws tightened securelyInstallation Instructions Installation Instructions Is it a technical fault? When do you incur costs even during the warranty period?Assembly 117 Removal 119 Salvo modificaciones