B)TO SET THE TIMER TO SWITCH OFF ONLY
i)Ensure the electricity supply is switched ON and that the correct time of day is displayed, e.g. 10.00am as Fig. 9.
ii)Set the main oven controls to the required function and temperature.
iii)Place food in the oven.
iv)To set the length of cooking time, press the
Selector Control button until the 'Cook Time'
( ) indicator neon is illuminated. Press the increase control ( + ) until the required length of cooking time is displayed, e.g. 2 hrs 15 mins as Fig. 10. Depress the decrease control ( - ) if necessary.
v)Release the buttons. The 'Cook Time' indicator neon ( ) will illuminate and the time of day will be displayed after 5 seconds.
vi)The oven indicator neon should be ON.
vii)To check the 'End Time' during the cooking period, simply press the Selector Control button once and the remaining time will be displayed, as Fig. 11.
4.TO CANCEL AN AUTOMATIC PROGRAMME
i)To cancel an automatic programme press the
Selector Control button until the 'Cook Time' ( ) indicator neon flashes. Press the decrease control ( - ) until the display reads 0.00 as Fig. 12.
ii)Release the buttons. The 'Cook Time' ( ) indicator neon will flash and after 5 seconds return to the time of day.
iii)Turn off the oven controls.
5.TO RETURN THE APPLIANCE TO MANUAL
At the end of a timed cooking period, the indicator neon will flash and an alarm will sound for up to 2 minutes.
i)To stop the sound press any of the buttons, as Fig. 13.
ii)The display will return to the time of day.
iii)Turn off the oven controls.
Fig.9.
Fig.10.
Fig.11.
Fig.12.
Fig.13.
10