Electrolux D4101-4 Care and Cleaning, Cleaning Materials, Cleaning the Outside of the Appliance

Page 31

CARE AND CLEANING

BEFORE CLEANING ALWAYS ALLOW THE COOLING FAN TO COOL THE APPLIANCE DOWN BEFORE SWITCHING OFF AT THE ELECTRICITY SUPPLY.

CLEANING MATERIALS

Before using any cleaning materials on your appliance, check that they are suitable and that their use is recommended by the manufacturer.

Cleaners that contain bleach should NOT be used as they may dull the surface finishes. Harsh abrasives and scourers should also be avoided as damage will occur.

CLEANING THE OUTSIDE OF THE APPLIANCE

Do not use abrasive cleaning materials e.g. Hob Brite, Brillo pads or scourers on painted or printed finishes as damage may occur.

Regularly wipe over the control panel, doors and handles using a soft cloth and hot soapy water. To prevent streaking finish with a soft cloth.

Stainless Steel cream cleaners are abrasive and should be avoided as they may dull the surface finish. Any spillage on the stainless steel finish must be wiped off immediately.

Do not attempt to remove any of the control knobs from the panel as this may cause damage and is a safety hazard.

Under no circumstances should the door assembly be detached from the product for cleaning.

REMOVING AND REPLACING WIREWORK RUNNERS

Remove all shelves and furniture from the oven.

Hold the wirework at the bottom, unclip from the cavity side and gently pull towards the centre of the oven.

Unhook the runner at the top and remove from the cavity.

To replace the runners, hook the wirework side runner into the cavity, slide back and press into place.

Ensure the wirework runners are firmly in position before replacing the oven shelves.

SIDE PANEL

CAVITY

CENTRE

31

Image 31
Contents Competence D4101-4 Important Safety Information Contents BUILT-IN Electric Multifunction Double Oven Description of the ApplianceControl Panel Getting to Know Your ApplianceC D EF G H Telescopic Runners Grill and Oven FurnitureBefore Using the Appliance HOW to SET the Time of DAY Electronic TimerHOW to SET the Countdown Setting the Oven Timer Control To Cancel the CountdownTo SET the Timer to Switch on and OFF Automatically To Cancel AN Automatic Programme To SET the Timer to Switch OFF onlyTo Return the Appliance to Manual Automatic Cooking Things to NoteFull Width Dual Grill Using Full Width Dual GrillHints and Tips Grill PAN and HandlesFood Shelf Grill Time Grilling ChartSecond Oven Using Second OvenTo FIT the Second Oven Shelf Hints and Tips Second Oven Food Shelf Cooking Approx Position Tempc Second Oven Cooking ChartVentitherm FAN Operated Cooking Using Ventitherm FAN Operated CookingTo FIT the Main Oven Shelves Where fitted Using the Telescopic RunnersConventional Cooking Using Conventional CookingHints and Tips Ventitherm FAN Operated Conventional Cooking Oven Main Oven Cooking ChartInternal Temperatures Roasting ChartMeat Temperature Cooking Time Main Oven Full Width Dual Grill Using the Main Oven Full Width Dual GrillHints and Tips Pizza Using PizzaSpeedcook Using SpeedcookCooking Times Rotitherm Roasting Using Rotitherm RoastingFood Shelf Temp Rotitherm Roasting ChartFAN Controlled Defrosting Using FAN Controlled DefrostingRemoving and Replacing Wirework Runners Care and CleaningCleaning Materials Cleaning the Outside of the ApplianceCleaning the Second and Main Oven Roof Cleaning Inside the OvensCleaning the Door Glass To Remove the Inner Glass To Clean the Inner Glass Door PanelsTo Replace the Inner Glass Panel Replacing AN Oven Light Bulb Cleaning the Grill and Oven FurnitureSomething not Working SL1 1DZ AEGStandard guarantee conditions Guarantee ConditionsTechnical Details Do not lift the appliance by the handles Installation InstructionsPreparing Cabinet for Fitting Oven Choice of Electrical ConnectionBuilt In Installation Recommended Cabinet Dimensions in MillimetresTo Remove Cover of Mains Terminal HOW to Finish UnpackingConnecting to a HOB or Cooker Point Connecting to the Mains TerminalChecking Electrical Connections Fitting Into the Cabinet Page Page Page AEG