Frigidaire ES400 manual To Start the Delayed Self-Clean Cycle contd, Adjust Oven Temperature Lower

To Start the Delayed Self-Clean Cycle (cont'd)

INSTRUCTIONS		PRESS
Stopping or Interrupting	a Self-Cleaning	Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle
due to excessive smoke or fire in the oven:
1. Press @.		@

2.Once the oven has cooled down for approximately 1 HOUR and the "DOOR LOCKED" icon is no longer displayed, the oven door can then be opened (Fig. 2-1).

The temperature in the oven has been pre-set at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven is too hot or too cool, the temperature in the oven can be adjusted. Before adjusting, test a recipe by using a temperature setting that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed.

INSTRUCTIONSPRESS

To adjust the oven temperature higher:

1. Press ) for 6 seconds (Fig. 1).

2.To increase the temperature use the number pads to enter the

desired change. (Example 30°F) @ @ (Fig. 2). The	®®
temperature may be increased as much as 35°F (17°C).

3.Press OI to accept the temperature change and the display

	will return		to the time of day (Fig.			3). Press @		to reject the	@
	change	if necessary.
To	adjust	the oven		temperature		lower:
1.	Press		I for 6 seconds (Fig.		4).
2. To decrease the temperature use the number pads to enter the									®@@
	desired	change. (Example-30°F)				@	@	and then press
	) (Fig.		5). The temperature		may be decreased as much as
	35°F(17°C).
3.	Press OI		to accept	the temperature			change and the display
	will return		to the time of day (Fig.			6). Press @		to reject the	@
	change	if necessary.

DISPLAY

Figure 2-1

Note: The oven

temperature adjustments made with this feature wilt not change the Self-Clean cycle temperature.

DISPLAY

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

28