Frigidaire L5V3E4 Setting the Clock, Changing between 12 or 24 hour time of day display

Page 17

Setting the Clock

The SET CLOCK pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash.

To set the clock (example below for 1:30)

1.Press SET CLOCK. “CLO” will appear in the display.

2.Press 1 3 0 pads to set the time of day to 1:30. “CLO” will stay in the display.

3.Press START. “CLO” will disappear and the clock will start.

Changing between 12 or 24 hour time of day display

1.Press and hold SET CLOCK for 6 seconds. “CLO” will appear in the display.

2.CONTINUE holding the pad until “12Hr dAY” or “24Hr dAY” appears in the display and the control beeps once.

3.Press SELF CLEAN to switch between the 12 and 24 hour time of day display. The display will show either “12Hr dAY” or “24Hr dAY”.

4.Press START to accept the change or press CANCEL to reject the change.

5.Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours.

Setting OVEN controls

Setting Continuous Bake or 6 Hour Energy Saving

The TIMER and SELF CLEAN pads control the Continuous Bake or 6 Hour Energy Saving features. The oven control has a factory preset built-in 6 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 6 hours. The oven can be programmed to override this feature for Continuous Baking.

To set the control for Continuous Bake or 6 Hour Energy Saving features

1.Press and hold TIMER for 6 seconds.

After 6 seconds “6Hr OFF” or “StAY On” will appear in the display and the control will beep once.

2.Press SELF CLEAN to switch between the 6 Hour Energy Saving and continuous bake features.

Note: “6Hr OFF” in the display indicates the control is set for the 6 Hour Energy Saving mode and “StAY On” indicates the control is set for the Continuous Bake feature.

3.Press START to accept the change (display will return to time of day) or press CANCEL to reject the change.

Setting Temperature Display — Fahrenheit or Celsius:

The BROIL and SELF CLEAN pads control the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit.

To change display from Fahrenheit to Celsius or Celsius to Fahrenheit

1.To tell if the display is set for Fahrenheit or Celsius press BROIL and hold it for 6 seconds; “550°” will appear and “BROIL” will flash in the display and a beep will sound. If “FAhrnht” appears, the display is set to show temperatures in Fahrenheit. If “CELSIUS” appears, the display is set to show temperatures in Celsius.

2.Press SELF CLEAN to switch between Fahrenheit or Celsius display modes. The display will show either “FAhrnht” or “CELSIUS”.

3.Press START to accept the change or press CANCEL to reject the change.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Use &Care Register Your Product Welcome & CongratulationsProduct Please Carefully read and save these instructionsDefinitions Important Safety InstructionsDo Not Use Decorative Surface Burner Covers Important Instructions for Using Your cooktopImportant Safety Instructions for Cleaning Your Oven Important Safety Instructions for Using Your OvenFor Glass Cooktop only Save these instructions for future reference2021 Your built-in range FeaturesBefore Setting surface controls About the radiant surface elements Using proper cookwareAbout the ceramic glass cooktop Cookware material typesTo Operate the Single Radiant Surface Elements Setting surface controlsSingle radiant surface elements To Operate the Dual Surface Element Dual Surface Radiant ElementKeep warm zone Keep warm zone recommended food settings table Food ItemUpper Oven Rack Positions Installing Upper Oven Rack SupportsArranging Lower Oven Racks Air circulation in the ovenTypes of oven racks Never pick up hot oven rack parts Effortless oven rack systemTo assemble the Effortless Oven Rack system Control pad features Setting Oven controlsFeature Minimum TEMP. /TIME Maximum TEMP. /TIME Minimum and Maximum Control Pad SettingsTemperature Visual Display Setting Continuous Bake or 6 Hour Energy Saving Setting the ClockSetting Temperature Display Fahrenheit or Celsius Changing between 12 or 24 hour time of day displaySetting Minute Timer Setting Lockout FeatureSetting Silent Control Operation Setting Add 1 Minute FeatureSetting Bake Setting Quick PreheatTo set the Quick Preheat temperature for 375F To set the Bake Temperature to 375FConvection Baking Tips Setting Convection Bake lower oven onlyBenefits of Convection Bake Air circulation during Convection BakeSetting Convection Roast lower oven only Setting Convection Convert lower oven onlyTo set a Convection Roast Temperature of 375F Convection Roasting TipsTo set a Convection Broil Temperature of 500F Setting Convection Broil lower oven onlyConvection Broiling Tips Electric Oven Convection Broiling Table RecommendationsSetting Delay Start Setting Bake TimeWhen the timed bake finishes BAKE, Convect BAKE, Bake Time and DelayBroiling Tips Setting BroilCancel Setting Pizza Setting Chicken NuggetsDelayed Bake Time Setting Keep WarmKeep Warm Tips To set Keep WarmOven will turn on and begin heating Oven light Adjusting Oven TemperatureWhat to Expect during Cleaning SELF-CLEANINGAdhere to the following cleaning precautions Stopping or Interrupting a Self-Cleaning Cycle Setting SELF-CLEAN Cycle Time LengthWhen the Self-Clean Cycle is Completed Cleaning various parts of your appliance Care & Cleaning Cleaning ChartCeramic glass cooktop cleaning & maintenance Care & CleaningCleaning recommendations for the ceramic glass cooktop For light to moderate soilBe Sure Oven is Cool Care and cleaning of stainless steelChanging oven light Off lower oven door Removing and replacing the liftFirmly grasp both sides of oven door along the door To Remove Oven DoorRemoving and Replacing the Lift- Off Upper Oven Door Oven baking Occurrence Possible CAUSE/SOLUTION Soil not completely removed after self- cleaning cycle Self-cleaning cycleScratches or Abrasions onPage Disclaimer of Implies Warranties Limitation of Remedies Exclusions This warranty does not cover the following
Top Page Image Contents