Frigidaire 318205204 Setting SELF-CLEAN Cycle Time Length, When the Self-Clean Cycle is Completed

Page 30

SELF-CLEANING

SETTING SELF-CLEAN CYCLE TIME LENGTH

The SELF CLEAN pad controls the Self-Cleaning feature. If you are planning to use the oven directly after a self-clean cycle remember to allow time for the oven to cool down and the oven door to unlock. This normally takes about one hour. So a 3 hour self-clean cycle will actually take about 4 hours to complete.

*It is recommend to use a 2 hour self-clean cycle for light soils, a 3 hour cycle for average soils, and a 4 hour cycle for heavy soils (to assure satisfactory results).

To set the controls for a 3 hour Self-Cleaning cycle

to start immediately and shut off automatically

1.Be sure the clock is set with the correct time of day and the oven door is closed.

2.Press UPPER or LOWER to select oven.

3.Press SELF CLEAN. “3:00” and CLn will show in the display. The control will automatically clean for a 3 hour period (default self-cleaning cycle time). For the first 10 seconds, “Remove Racks” will flash and beep to remind you that the racks need to be removed.

NOTE

If a 2 or 4 hour clean time is desired, press SELF CLEAN multiple times to toggle between 2, 3 or 4 hours.

4.Press START. The “DOOR” icon will flash.

5.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the “DOOR” indicator light will

stop flashing and remain on and the icon will appear. Also, the oven icon will appear in the display.

NOTE

Allow about 15 seconds for the oven door lock to close.

When the Self-Clean Cycle is Completed

1. “HOT” will appear in the display. The time of day, the “DOOR” and icon will remain in the display.

2.Once the oven has cooled down for approximately 1 HOUR, and the “DOOR” is no longer displayed, the oven door can then be opened.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire in the oven:

1.Press CANCEL.

2.The oven door can only be opened after the oven has cooled down for approximately 1 HOUR and the “DOOR” and icons are no longer displayed.

The SELF CLEAN and DELAY START pads controls the Delayed Self-Clean operation. The automatic timer will turn the oven on and off at the time you select in advance.

To set the control for the Self-Cleaning Cycle to start at a delayed time and shut off automatically (example: 3 hour self-clean cycle to start at 4:30)

1.Be sure the clock is set with the correct time of day and the oven door is closed.

2.Press UPPER or LOWER to select oven.

3.Press SELF CLEAN. “3:00” and CLn will show in the display. The control will automatically clean for a 3 hour period. For the first 10 seconds, “Remove Racks” will flash and beep to remind you that the racks need to be removed.

NOTE

If a 2 or 4 hour clean time is desired, press SELF CLEAN multiple times to toggle between 2, 3 or 4 hours.

4.Press START. The “DOOR” icon will flash.

5.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the “DOOR” indicator light will quit

flashing and remain on and the icon will appear.

6.Press DELAY START. Enter the desired start time using the number pads 4 3 0.

7.Press START. “DELAY”, “DOOR LOCKED” and “CLEAN” icons will remain on.

8.The control will start the self-cleaning at the set start time, for the period of time previously selected. At that time, the icon “DELAY” will go out; “CLn” and oven icon will appear in the display.

When the Self-Clean Cycle is Completed

1. “HOT” will appear in the display. The time of day, the “DOOR” and icon will remain in the display.

2.Once the oven has cooled down for approximately 1 HOUR, and the “DOOR” is no longer displayed, the oven door can then be opened.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning

cycle due to excessive smoke or fire in the oven:

1.Press CANCEL.

2.The oven door can only be opened after the oven has cooled down for approximately 1 HOUR and the “DOOR” and icons are no longer displayed.

NOTE

The surface elements and the 2nd oven cannot be activated when the Self-Clean feature is active (see the section: The electronic surface element control (ESEC)).

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Use &Care Product Welcome & CongratulationsRegister Your Product Please Carefully read and save these instructionsImportant Safety Instructions DefinitionsImportant Instructions for Using Your cooktop Do Not Use Decorative Surface Burner CoversFor Glass Cooktop only Important Safety Instructions for Using Your OvenImportant Safety Instructions for Cleaning Your Oven Save these instructions for future referenceYour built-in range Features 2021Before Setting surface controls About the ceramic glass cooktop Using proper cookwareAbout the radiant surface elements Cookware material typesSetting surface controls Single radiant surface elementsTo Operate the Single Radiant Surface Elements Dual Surface Radiant Element To Operate the Dual Surface ElementKeep warm zone recommended food settings table Food Item Keep warm zoneArranging Lower Oven Racks Installing Upper Oven Rack SupportsUpper Oven Rack Positions Air circulation in the ovenTypes of oven racks Effortless oven rack system To assemble the Effortless Oven Rack systemNever pick up hot oven rack parts Setting Oven controls Control pad featuresMinimum and Maximum Control Pad Settings Temperature Visual DisplayFeature Minimum TEMP. /TIME Maximum TEMP. /TIME Setting Temperature Display Fahrenheit or Celsius Setting the ClockSetting Continuous Bake or 6 Hour Energy Saving Changing between 12 or 24 hour time of day displaySetting Silent Control Operation Setting Lockout FeatureSetting Minute Timer Setting Add 1 Minute FeatureTo set the Quick Preheat temperature for 375F Setting Quick PreheatSetting Bake To set the Bake Temperature to 375FBenefits of Convection Bake Setting Convection Bake lower oven onlyConvection Baking Tips Air circulation during Convection BakeTo set a Convection Roast Temperature of 375F Setting Convection Convert lower oven onlySetting Convection Roast lower oven only Convection Roasting TipsConvection Broiling Tips Setting Convection Broil lower oven onlyTo set a Convection Broil Temperature of 500F Electric Oven Convection Broiling Table RecommendationsWhen the timed bake finishes Setting Bake TimeSetting Delay Start BAKE, Convect BAKE, Bake Time and DelaySetting Broil CancelBroiling Tips Setting Chicken Nuggets Setting PizzaKeep Warm Tips Setting Keep WarmDelayed Bake Time To set Keep WarmOven will turn on and begin heating Adjusting Oven Temperature Oven lightSELF-CLEANING Adhere to the following cleaning precautionsWhat to Expect during Cleaning Setting SELF-CLEAN Cycle Time Length When the Self-Clean Cycle is CompletedStopping or Interrupting a Self-Cleaning Cycle Care & Cleaning Cleaning Chart Cleaning various parts of your applianceCleaning recommendations for the ceramic glass cooktop Care & CleaningCeramic glass cooktop cleaning & maintenance For light to moderate soilCare and cleaning of stainless steel Changing oven lightBe Sure Oven is Cool Firmly grasp both sides of oven door along the door Removing and replacing the liftOff lower oven door To Remove Oven DoorRemoving and Replacing the Lift- Off Upper Oven Door Oven baking Occurrence Possible CAUSE/SOLUTION Scratches or Self-cleaning cycleSoil not completely removed after self- cleaning cycle Abrasions onPage Exclusions This warranty does not cover the following Disclaimer of Implies Warranties Limitation of Remedies
Top Page Image Contents