Care & Cleaning
Cleaning the Cooktop, Burner Heads, Caps & Grates
The cooktop isdesigned to make cleaning easier. Because the gas Burners are sealed, cleanups are easy when spillovers are cleaned up immediately.
The cooktop, Burner Heads and Caps should be routinelycleaned. Keeping the Burner Head Ports clean will prevent improper ignition and an uneven flame. Refer to the following instructions:
THE COOKTOP IS NOT REMOVABLE. Do not attempt to remove or lift the cooktop.
THE FIXED OVEN VENT IS NOT REMOVABLE. Do not attempt to remove the fixed oven vent cover.
ignition or preventUSetheCaUti°nburnerWhenfromreplacingigniting,Burner Caps so the Electrodes are not damaged. This may cause a delayed
Any additions, changes or conversions required in order for this appliance to perform satisfactorily must be made by authorized servicer.
Burner Head
To Remove and Replace the Surface Burner Caps and Burner Heads- Remove in the following order: (t st) surface Burner Grates, (2nd) Burner Caps and (3rd) Burner Heads. Reverse the procedure above to replace the surface Burner Caps, Burner Heads and Burner Grates.
Do not remove any parts from the cooktop until they have completely cooled and are safe to handle. Do not operate the surface Burners without the Burner Caps and Burner Heads properly in place.
To Clean the surface Burner Caps and Burner Heads- Use a
To Clean the Burner Grates- The Burner Grates are dishwash er safe and may be
cleaned in the dishwasher. Remove any excessive soils before placing in the dishwasher.
To Clean the Cooktop and contoured areas of the Cooktop- If a spill occurs on or in the recessed or contoured areas, blot up spill with an absorbent cloth. Rinse with a clean, damp cloth and wipe dry. Do not use harsh abrasive cleaners on the cooktop. They can scratch the pocelain. Completely rinse any mild cleaners used from the surface or the porcelain cooktop may become damaged during future heating. DO NOT use spray oven cleaners on the cooktop.
16