Removing Replacing Oven Door | Frigidaire CFGS365EB5, CFGS365FC3

Care and Cleaning of Stainless Steel (Stainless Steel models only)

Some models are equipped with stainless steel exterior parts. Special care and cleaning are required for maintaining the appearance of stainless parts. Please refer to the table provided at the beginning of the General Care & Cleaning section in this Use & Care Guide.

Removing

and

Replacing

the Oven Door

_[_

The door isheavy. For safe, temporary

storage, lay the door flat with the inside

Lock engaged

of the door facing down.

To Remove Oven Door:

for door removal

Figure 1

Open

the door to the fully opened position.

Pull up the lock located on both hinge supports and

engage it in the hinge levers

(Figure 1).You may have to apply a little downward pressure on the door to pull the

locks fully over the hooks.

Grab

the door by the sides, pull the bottom of the door up and toward you to disengage

the hinge supports. Keep pulling the bottom of the door toward you while rotating the top

of the door toward the range to completely disengage the hinge levers (Figure 2).

To clean oven door, follow the instructions provided

in the General Care &

Cleaning

table.

HINGE SLOT

To Replace Oven Door:

Door removed from the range

Grab

the door by the sides;

place the hinge supports

in the hinge

slots. Open the door to

Figure 2

the fully opened position.

Disengage the lock from the hinge levers on both sides (Figure

3).

Note: Make sure the hinge supports are fully engaged before unlocking the hinge levers.

the oven door.

Special

Door

Care

Instructions

= Most oven

doors contain

glass that

can break.

Read the following recommendations:

Do not close

the oven door until all the oven racks are fully in place.

Do not hit the glass with pots, pans,

or any other

object.

Lock in normal

Scratching,

hitting,

jarring

or stressing the glass

may weaken

its structure

causing an

increased risk of breakage

at a later

time.

position

Figure 3