Sherwood R-772 manual Operations, Listening to a Program Source, Before operation

Page 30

R-772(A)2007.8.165:21PM페이지30

ENGLISH

Operations

�Notes:

•Before operating this receiver with the supplied remote control, refer to "Universal Remote Controls" on page 17 for details about operation.

•Before operating this receiver, first set this unit as desired for optimum performance, doing the OSD menu setting procedures. (For details, refer to "OSD Menu Settings" on page 47.)

LISTENING TO A PROGRAM SOURCE

Before operation

•Enter the standby mode.

•The POWER ON/STANDBY button

lights up amber. This means that the receiver is not disconnected from the AC mains and a small amount of current is retained to support the operation readiness.

•To switch the power off, push the POWER switch again.

Then the power is cut off and the POWER ON/STANDBY button goes off.

1. In the standby mode, turn the power on.

•Each time the POWER ON/STANDBY button on the front panel is pressed, the receiver is turned on to enter the operating mode (the POWER ON/ STANDBY button lights up blue) or off to enter the standby mode(the POWER ON/STANDBY button lights up amber).

•On the remote control, press the POWER ON button to enter the operating mode or press the STANDBY button to enter the standby mode.

•In the standby mode, if the INPUT SELECTOR button is pressed, the receiver is turned on automatically and the desired input is selected.

2. Switch the speakers on.

• Then the SPEAKER indicator lights up and the sound can be heard from the speakers connected to the speaker terminals.

•When using the headphones for private listening, press the SPEAKER button again to switch the speakers off.

3. Select the desired input source.

•Each time the "AUDIO" button on the front panel is pressed, the input source changes as follows:

→CD → AUX → TAPE

•Each time the "VIDEO" button on the front panel is pressed, the input source changes as follows:

→VIDEO 1→VIDEO 2→VIDEO 3 →VIDEO 4

•Each time the "TUNER" button is pressed, the band changes as follows:

→ FM STereo → FM MONO → AM → XM

�When selecting the EXTERNAL IN as desired,

•Depending on the power amplifier setting for the surround back channels and the surround back speaker setting, "EXT. IN" is displayed and 8(/7/6) separate analog signals from the component connected to this input pass through the tone and volume circuits only and can be heard from your speakers.

•Select the desired input source to cancel the external in function.

•These analog signals can be heard only, not recorded.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents 772A2007.8.16521PM페이지1 Safety Instructions Introduction Read this Before Operating Your UnitContents Connecting Antennas System ConnectionsConnecting Video Components Component in 1 Video 1, Component in 2 Video Component Video Composite VideoConnecting Audio Components Connecting External INSConnecting XM only for North America Connecting Subwoofer Preout Connecting Digital INS and OUTConnecting DC Trigger OUT Digital input default settingsSetting the SPEAKER/ROOM EQ Setup on Connecting SpeakersFor installing the speakers, refer to Speaker placement on Surround back speakersSurround left and right speakers Speaker placementFront left and right speakers and center speaker Surround back left and right speakersConnecting Room 2 Outs Connecting RF Remote AntennaFor details, refer to Changing the transmission signal on Connecting MULTI-ROOM System KIT Connecting PC for UpgradesSwitched AC Outlets AC Input CordPlug this cord into a wall AC outlet Front Panel Controls Remote SensorFluorescent Display Setup MIC Jack AUX in JackUniversal Remote Controls About the transmission signalFunction Table of the Numbered Buttons Loading Batteries Entering a setup code Learn RF-IR Delete Macro Code PunchSearching a setup code Code. Note772A2007.8.16521PM페이지22 Erasing the programmed command from one button Erasing all the commands programmed under a device modeProgramming a macro function To erase a macro programTo change a macro program Operating a macro function Programing a punch-through functionCase of the transport punch-through Operating a punch-through functionErasing the programmed puch-through function Case of the channel punch-through772A2007.8.16521PM페이지27 Changing the transmission signal Signal into RFRadio Frequency. NotesWhen RF is set to Loading Battery Room 2 Remote ControlsRemote Control Operation Range Remove the battery when it is not used for a long timeListening to a Program Source When selecting the External in as desiredOperations Before operationAdjust the overall volume When CD, AUX, Video 1~ 4 is selected as an input sourceListening with headphones Muting the soundSurround modes Dolby Virtual Speaker Reference Enjoying Surround Sound Dolby DIGITAL, Dolby VS REF, Dolby VS WideTo cancel the surround mode for stereo operation Listening in Dolby Headphone modeAdjusting each channel level with test tone 2CH downmix modeAdjusting the current channel level Select the desired channelMemorizing the adjusted channel levels Recalling the memorized channel levelsAuto presetting Auto tuningManual tuning Listening to Radio BroadcastsManual presetting Tuning to preset stationsScanning preset stations in sequence To sign up, access the website at Press the Tuner button repeatedly to select XM modePress the Tuning UP+/DOWN- buttons repeatedly to select XM XM Satellite Radio only for North AmericaChannel search XM mode, select the direct search modeXM mode, select the category search mode Direct searchError message and status Presetting channels Preset searchSignal strength display mode Displaying XM informationWhile operating the sleep timer, lights up Operating the sleep timerAdjusting the brightness of the fluorescent display Other FunctionsRoom 2 Source Playback VOL ~TAPE, Video 1 ~ Video Dubbing the audio and video signals separately onto Video RecordingRecording with Tape Dubbing from video components onto VideoOSD Menu Settings Multi772A2007.8.16521PM페이지48 When selecting the AMP Assign Setting the System SetupWhen selecting the items other than OSD Position Adjust Press the Cursor UP/DOWN buttons to select the desired itemWhen selecting the Subwoofer Mode When selecting the Hdmi Audio OUTWhen selecting the Tone Control When selecting the Cinema EQ When selecting the BackgroundWhen selecting the Momentary OSD When selecting the OSD Position Adjust Setting the Input Setup When selecting the items other than NameWhen selecting the menu of page 2 or When selecting the Video Mode When selecting the Hdmi AssignWhen selecting the Video Assign When selecting the Audio AssignWhen selecting the AV Sync When selecting the Auto SurroundWhen selecting the Audio Remaster When selecting the DC TriggerTo resume its factory input source name When selecting the NameConfirm your entry Name is stored in the memory Make a blank on each digit and press the Enter buttonSetting the Speaker / Room EQ Setup When selecting the Auto SetupPreparations 772A2007.8.16521PM페이지58 When selecting the Speaker Configuration When selecting the Speaker Distance About the speaker distanceWhen selecting the Speaker Crossover When selecting the Room EQ Setup When selecting the User mode Setting the CH Level Setup Reference Setting the Sound Parameter When selecting the Night ModeMAX When selecting the Center Width control When selecting the Dolby Plii MusicWhen selecting the Panorama mode When selecting the Dimension controlWhen selecting the Dolby Headphone When selecting the Dolby Virtual Speaker When selecting the Dolby Virtual Speaker Wide modeWhen selecting the Input Setting the Multi Room SetupWhen selecting the Room When selecting the VolumeTroubleshooting Guide Problem Possible Cause RemedySpecifications Amplifier SectionSetup Code Table TMK RCASSS CCESTS KLHMEI ABC NSCSAT HTSNSM DKKMCS QED772A2007.8.16521PM페이지1
Related manuals
Manual 70 pages 5.16 Kb

R-772 specifications

The Sherwood R-772 is a versatile and powerful stereo receiver that appeals to audiophiles and casual listeners alike. This model, known for its robust performance and rich sound quality, is designed to meet the demands of modern audio systems while retaining classic features that enhance user experience.

One of the standout features of the Sherwood R-772 is its substantial power output. With the ability to deliver 100 watts per channel, this receiver can easily drive a wide range of speakers, providing dynamic and impactful audio that fills the room. This power output is complemented by its low total harmonic distortion, ensuring that the audio remains clean and detailed, even at higher volumes.

In terms of connectivity, the R-772 is equipped with multiple inputs for various audio sources. It includes several analog audio inputs, allowing users to connect their CD players, turntables, and other devices effortlessly. Additionally, the receiver supports AM/FM radio with a built-in tuner, providing access to a wide array of radio stations and programming. The inclusion of digital inputs enhances its compatibility with modern devices, ensuring an all-encompassing audio experience.

Another attractive feature of the Sherwood R-772 is its advanced surround sound processing. It supports various surround sound formats, enhancing the listening experience for movies and music. The inclusion of Dolby Pro Logic II allows users to enjoy stereo content in a multi-dimensional audio field, making movies and music come alive in their homes.

The R-772 is also designed with user convenience in mind. Its easy-to-navigate interface and remote control make it straightforward to operate, providing users with quick access to their favorite audio settings. The receiver also features a comprehensive equalization system, allowing users to personalize their listening experience and tailor the sound to their preferences.

Durability and build quality are characteristic of Sherwood products, and the R-772 is no exception. Its solid construction ensures longevity while maintaining aesthetic appeal. This model is designed to blend seamlessly with a home audio setup, offering both style and substance.

In conclusion, the Sherwood R-772 stereo receiver stands out with its powerful performance, versatile connectivity, and user-friendly features. It embodies a perfect balance of modern technology and traditional audio quality, ensuring that it remains a valuable addition to any audio system for years to come. This receiver is an excellent choice for anyone looking to enhance their listening experience, regardless of their level of audio expertise.
Top Page Image Contents