Sherwood R-772 manual Listening to Radio Broadcasts, Auto tuning, Manual tuning, Auto presetting

Page 38

R-772(A)2007.8.2010:2AM페이지38

ENGLISH

LISTENING TO RADIO BROADCASTS

Auto tuning

1. Select the desired band.

•Each time this button is pressed, the band changes as follows :

→FM STereo → FM MONO → AM → XM

("ST" lights up)

("ST" goes off)

•When FM stereo broadcasts are poor because of weak broadcast signals, select the FM mono mode to reduce the noise, then FM broadcasts are reproduced in monaural sound.

•To listen to XM Satellite Radio, select XM mode. (For details, refer to "XM Satellite Radio (only for North America)" on page 40.)

2. Press the TUNING UP(+)/DOWN(-) buttons for more than 0.5 second.

•The tuner will now search until a station of sufficient strength has been found. The display shows the tuned frequency and "TUNED".

•If the station found is not the desired one, simply repeat this operation.

•Weak stations are skipped during auto tuning.

Manual tuning

•Manual tuning is useful when you already know the frequency of the desired station.

•After selecting the desired band, press the TUNING UP(+) / DOWN(-) buttons repeatedly until the right frequency has been reached.

Auto presetting

•Auto presetting function automatically searches for FM stations only and store them in the memory.

•While listening to FM or AM radio

broadcasts, press and hold down the MEMORY/ENTER button for more than 2 seconds.

•Then "AUTO MEM" flickers and this receiver starts auto presetting.

•Up to 30 FM stations can be stored.

�Notes:

•FM stations of weak strength cannot be memorized.

•To memorize AM stations or weak stations, preform "Manual presetting" procedure with using "Manual tuning" operation.

38

Page 37 Page 39
Image 38
Page 37 Page 39
Contents 772A2007.8.16521PM페이지1 Safety Instructions Introduction Read this Before Operating Your UnitContents Connecting Antennas System ConnectionsConnecting Video Components Component in 1 Video 1, Component in 2 Video Component Video Composite VideoConnecting XM only for North America Connecting Audio ComponentsConnecting External INS Connecting Subwoofer Preout Connecting Digital INS and OUTConnecting DC Trigger OUT Digital input default settingsSetting the SPEAKER/ROOM EQ Setup on Connecting SpeakersFor installing the speakers, refer to Speaker placement on Surround back speakersSurround left and right speakers Speaker placementFront left and right speakers and center speaker Surround back left and right speakersFor details, refer to Changing the transmission signal on Connecting Room 2 OutsConnecting RF Remote Antenna Connecting MULTI-ROOM System KIT Connecting PC for UpgradesPlug this cord into a wall AC outlet Switched AC OutletsAC Input Cord Fluorescent Display Front Panel ControlsRemote Sensor Setup MIC Jack AUX in JackUniversal Remote Controls About the transmission signalFunction Table of the Numbered Buttons Loading Batteries Entering a setup code Learn RF-IR Delete Macro Code PunchSearching a setup code Code. Note772A2007.8.16521PM페이지22 Erasing the programmed command from one button Erasing all the commands programmed under a device modeTo change a macro program Programming a macro functionTo erase a macro program Operating a macro function Programing a punch-through functionCase of the transport punch-through Operating a punch-through functionErasing the programmed puch-through function Case of the channel punch-through772A2007.8.16521PM페이지27 When RF is set to Changing the transmission signalSignal into RFRadio Frequency. Notes Loading Battery Room 2 Remote ControlsRemote Control Operation Range Remove the battery when it is not used for a long timeListening to a Program Source When selecting the External in as desiredOperations Before operationAdjust the overall volume When CD, AUX, Video 1~ 4 is selected as an input sourceListening with headphones Muting the soundSurround modes Dolby Virtual Speaker Reference Enjoying Surround Sound Dolby DIGITAL, Dolby VS REF, Dolby VS WideTo cancel the surround mode for stereo operation Listening in Dolby Headphone modeAdjusting each channel level with test tone 2CH downmix modeAdjusting the current channel level Select the desired channelMemorizing the adjusted channel levels Recalling the memorized channel levelsAuto presetting Auto tuningManual tuning Listening to Radio BroadcastsScanning preset stations in sequence Manual presettingTuning to preset stations To sign up, access the website at Press the Tuner button repeatedly to select XM modePress the Tuning UP+/DOWN- buttons repeatedly to select XM XM Satellite Radio only for North AmericaChannel search XM mode, select the direct search modeXM mode, select the category search mode Direct searchError message and status Presetting channels Preset searchSignal strength display mode Displaying XM informationWhile operating the sleep timer, lights up Operating the sleep timerAdjusting the brightness of the fluorescent display Other FunctionsTAPE, Video 1 ~ Video Room 2 Source PlaybackVOL ~ Recording with Tape Dubbing the audio and video signals separately onto VideoRecording Dubbing from video components onto VideoOSD Menu Settings Multi772A2007.8.16521PM페이지48 When selecting the AMP Assign Setting the System SetupWhen selecting the items other than OSD Position Adjust Press the Cursor UP/DOWN buttons to select the desired itemWhen selecting the Tone Control When selecting the Subwoofer ModeWhen selecting the Hdmi Audio OUT When selecting the Momentary OSD When selecting the Cinema EQWhen selecting the Background When selecting the OSD Position Adjust When selecting the menu of page 2 or Setting the Input SetupWhen selecting the items other than Name When selecting the Video Mode When selecting the Hdmi AssignWhen selecting the Video Assign When selecting the Audio AssignWhen selecting the AV Sync When selecting the Auto SurroundWhen selecting the Audio Remaster When selecting the DC TriggerTo resume its factory input source name When selecting the NameConfirm your entry Name is stored in the memory Make a blank on each digit and press the Enter buttonPreparations Setting the Speaker / Room EQ SetupWhen selecting the Auto Setup 772A2007.8.16521PM페이지58 When selecting the Speaker Configuration When selecting the Speaker Distance About the speaker distanceWhen selecting the Speaker Crossover When selecting the Room EQ Setup When selecting the User mode Setting the CH Level Setup Reference MAX Setting the Sound ParameterWhen selecting the Night Mode When selecting the Center Width control When selecting the Dolby Plii MusicWhen selecting the Panorama mode When selecting the Dimension controlWhen selecting the Dolby Headphone When selecting the Dolby Virtual Speaker When selecting the Dolby Virtual Speaker Wide modeWhen selecting the Input Setting the Multi Room SetupWhen selecting the Room When selecting the VolumeTroubleshooting Guide Problem Possible Cause RemedySpecifications Amplifier SectionSetup Code Table TMK RCASSS CCEMEI STSKLH ABC NSCSAT HTSNSM DKKMCS QED772A2007.8.16521PM페이지1
Related manuals
Manual 70 pages 5.16 Kb

R-772 specifications

The Sherwood R-772 is a versatile and powerful stereo receiver that appeals to audiophiles and casual listeners alike. This model, known for its robust performance and rich sound quality, is designed to meet the demands of modern audio systems while retaining classic features that enhance user experience.

One of the standout features of the Sherwood R-772 is its substantial power output. With the ability to deliver 100 watts per channel, this receiver can easily drive a wide range of speakers, providing dynamic and impactful audio that fills the room. This power output is complemented by its low total harmonic distortion, ensuring that the audio remains clean and detailed, even at higher volumes.

In terms of connectivity, the R-772 is equipped with multiple inputs for various audio sources. It includes several analog audio inputs, allowing users to connect their CD players, turntables, and other devices effortlessly. Additionally, the receiver supports AM/FM radio with a built-in tuner, providing access to a wide array of radio stations and programming. The inclusion of digital inputs enhances its compatibility with modern devices, ensuring an all-encompassing audio experience.

Another attractive feature of the Sherwood R-772 is its advanced surround sound processing. It supports various surround sound formats, enhancing the listening experience for movies and music. The inclusion of Dolby Pro Logic II allows users to enjoy stereo content in a multi-dimensional audio field, making movies and music come alive in their homes.

The R-772 is also designed with user convenience in mind. Its easy-to-navigate interface and remote control make it straightforward to operate, providing users with quick access to their favorite audio settings. The receiver also features a comprehensive equalization system, allowing users to personalize their listening experience and tailor the sound to their preferences.

Durability and build quality are characteristic of Sherwood products, and the R-772 is no exception. Its solid construction ensures longevity while maintaining aesthetic appeal. This model is designed to blend seamlessly with a home audio setup, offering both style and substance.

In conclusion, the Sherwood R-772 stereo receiver stands out with its powerful performance, versatile connectivity, and user-friendly features. It embodies a perfect balance of modern technology and traditional audio quality, ensuring that it remains a valuable addition to any audio system for years to come. This receiver is an excellent choice for anyone looking to enhance their listening experience, regardless of their level of audio expertise.
Top Page Image Contents