Sherwood R-772 manual When selecting the Name, Confirm your entry Name is stored in the memory

R-772(A)2007.8.165:21PM페이지56

ENGLISH

When selecting the NAME

•You can give names to the input sources other than tuner.

•Up to 7 characters can be entered for each name.

1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired input source, then press the ENTER button.

Example: When selecting the VIDEO 1

2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the NAME, then press the ENTER button.

• The first digit flickers.

3. Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to select the desired digit.

• Then the selected digit will flicker.

4. Press the CURSOR UP(▲)/DOWN(▼) buttons to enter the desired character on the flickering digit.

•You can enter the desired among blank, A ~ Z, a ~ z, 0 ~ 9, (, ), �, +, , , -, ., /.

5. Repeat the above steps 3 and 4 to enter the desired characters on the rest of the digits.

6. Confirm your entry.

• The name is stored in the memory.

■To resume its factory input source name.

•Make a blank on each digit and press the ENTER button.

56