Sherwood R-772 manual Searching a setup code, Code. Note

Page 21

R-772(A)2007.8.165:21PM페이지21

6. Operate the component using the corresponding

function buttons.

•If any of buttons fails to operate as they should, start from the step 1 again to enter the correct setup

code. �Note :

•Manufacturers may use different setup codes for the same product category. For that reason, it is important that you check to see if the code you have entered operates as many controls as possible. If only a few functions operate, check to see if another code will work with more buttons.

7. Repeat the above steps 1 to 6 for each of your

other components.

Searching a setup code

•In addition to enter a setup code using "Setup Code Table" on page 73, it is also possible to search through all the codes that are stored in the library of this remote control.

1. Turn on the component you want to operate.

2. Perform the steps 3 and 4 in "Entering a setup

code" procedure on page 20 to select the setup code mode ("CODE").

3. While "PRESET" is displayed, search a setup

code, aiming the remote control at the remote sensor on the component.

ENGLISH

•Each time the CURSOR UP(▲)/DOWN(▼) buttons are pressed, the setup code is selected one by one.

•If the selected code is correct, your component will be turned off.

•When your component is not turned off, repeat this step until you find one that works.

4.While "PRESET" is displayed, press the ENTER button to store the setup code.

• Then "OK" is displayed on the LCD screen.

5. Operate the component using the corresponding

function buttons.

•If any of buttons fails to operate as they should, start from the step 1 again to find the correct setup code.

6. Repeat the above steps 1 to 5 for each of your

other components.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 772A2007.8.16521PM페이지1 Safety Instructions Read this Before Operating Your Unit IntroductionContents System Connections Connecting AntennasConnecting Video Components Component Video Composite Video Component in 1 Video 1, Component in 2 VideoConnecting Audio Components Connecting External INSConnecting XM only for North America Connecting DC Trigger OUT Connecting Digital INS and OUTConnecting Subwoofer Preout Digital input default settingsFor installing the speakers, refer to Speaker placement on Connecting SpeakersSetting the SPEAKER/ROOM EQ Setup on Surround back speakersFront left and right speakers and center speaker Speaker placementSurround left and right speakers Surround back left and right speakersConnecting Room 2 Outs Connecting RF Remote AntennaFor details, refer to Changing the transmission signal on Connecting PC for Upgrades Connecting MULTI-ROOM System KITSwitched AC Outlets AC Input CordPlug this cord into a wall AC outlet Front Panel Controls Remote SensorFluorescent Display AUX in Jack Setup MIC JackAbout the transmission signal Universal Remote ControlsFunction Table of the Numbered Buttons Loading Batteries Learn RF-IR Delete Macro Code Punch Entering a setup codeCode. Note Searching a setup code772A2007.8.16521PM페이지22 Erasing all the commands programmed under a device mode Erasing the programmed command from one buttonProgramming a macro function To erase a macro programTo change a macro program Programing a punch-through function Operating a macro functionErasing the programmed puch-through function Operating a punch-through functionCase of the transport punch-through Case of the channel punch-through772A2007.8.16521PM페이지27 Changing the transmission signal Signal into RFRadio Frequency. NotesWhen RF is set to Remote Control Operation Range Room 2 Remote ControlsLoading Battery Remove the battery when it is not used for a long timeOperations When selecting the External in as desiredListening to a Program Source Before operationListening with headphones When CD, AUX, Video 1~ 4 is selected as an input sourceAdjust the overall volume Muting the soundSurround modes Dolby Virtual Speaker Reference Dolby DIGITAL, Dolby VS REF, Dolby VS Wide Enjoying Surround SoundAdjusting each channel level with test tone Listening in Dolby Headphone modeTo cancel the surround mode for stereo operation 2CH downmix modeSelect the desired channel Adjusting the current channel levelRecalling the memorized channel levels Memorizing the adjusted channel levelsManual tuning Auto tuningAuto presetting Listening to Radio BroadcastsManual presetting Tuning to preset stationsScanning preset stations in sequence Press the Tuning UP+/DOWN- buttons repeatedly to select XM Press the Tuner button repeatedly to select XM modeTo sign up, access the website at XM Satellite Radio only for North AmericaXM mode, select the category search mode XM mode, select the direct search modeChannel search Direct searchSignal strength display mode Presetting channels Preset searchError message and status Displaying XM informationAdjusting the brightness of the fluorescent display Operating the sleep timerWhile operating the sleep timer, lights up Other FunctionsRoom 2 Source Playback VOL ~TAPE, Video 1 ~ Video Dubbing the audio and video signals separately onto Video RecordingRecording with Tape Video Dubbing from video components ontoMulti OSD Menu Settings772A2007.8.16521PM페이지48 When selecting the items other than OSD Position Adjust Setting the System SetupWhen selecting the AMP Assign Press the Cursor UP/DOWN buttons to select the desired itemWhen selecting the Subwoofer Mode When selecting the Hdmi Audio OUTWhen selecting the Tone Control When selecting the Cinema EQ When selecting the BackgroundWhen selecting the Momentary OSD When selecting the OSD Position Adjust Setting the Input Setup When selecting the items other than NameWhen selecting the menu of page 2 or When selecting the Video Assign When selecting the Hdmi AssignWhen selecting the Video Mode When selecting the Audio AssignWhen selecting the Audio Remaster When selecting the Auto SurroundWhen selecting the AV Sync When selecting the DC TriggerConfirm your entry Name is stored in the memory When selecting the NameTo resume its factory input source name Make a blank on each digit and press the Enter buttonSetting the Speaker / Room EQ Setup When selecting the Auto SetupPreparations 772A2007.8.16521PM페이지58 When selecting the Speaker Configuration About the speaker distance When selecting the Speaker DistanceWhen selecting the Speaker Crossover When selecting the Room EQ Setup When selecting the User mode Setting the CH Level Setup Reference Setting the Sound Parameter When selecting the Night ModeMAX When selecting the Panorama mode When selecting the Dolby Plii MusicWhen selecting the Center Width control When selecting the Dimension controlWhen selecting the Dolby Headphone When selecting the Dolby Virtual Speaker Wide mode When selecting the Dolby Virtual SpeakerWhen selecting the Room Setting the Multi Room SetupWhen selecting the Input When selecting the VolumeProblem Possible Cause Remedy Troubleshooting GuideAmplifier Section SpecificationsSetup Code Table SSS RCATMK CCESTS KLHMEI NSC ABCHTS SATMCS DKKNSM QED772A2007.8.16521PM페이지1
Related manuals
Manual 70 pages 5.16 Kb

R-772 specifications

The Sherwood R-772 is a versatile and powerful stereo receiver that appeals to audiophiles and casual listeners alike. This model, known for its robust performance and rich sound quality, is designed to meet the demands of modern audio systems while retaining classic features that enhance user experience.

One of the standout features of the Sherwood R-772 is its substantial power output. With the ability to deliver 100 watts per channel, this receiver can easily drive a wide range of speakers, providing dynamic and impactful audio that fills the room. This power output is complemented by its low total harmonic distortion, ensuring that the audio remains clean and detailed, even at higher volumes.

In terms of connectivity, the R-772 is equipped with multiple inputs for various audio sources. It includes several analog audio inputs, allowing users to connect their CD players, turntables, and other devices effortlessly. Additionally, the receiver supports AM/FM radio with a built-in tuner, providing access to a wide array of radio stations and programming. The inclusion of digital inputs enhances its compatibility with modern devices, ensuring an all-encompassing audio experience.

Another attractive feature of the Sherwood R-772 is its advanced surround sound processing. It supports various surround sound formats, enhancing the listening experience for movies and music. The inclusion of Dolby Pro Logic II allows users to enjoy stereo content in a multi-dimensional audio field, making movies and music come alive in their homes.

The R-772 is also designed with user convenience in mind. Its easy-to-navigate interface and remote control make it straightforward to operate, providing users with quick access to their favorite audio settings. The receiver also features a comprehensive equalization system, allowing users to personalize their listening experience and tailor the sound to their preferences.

Durability and build quality are characteristic of Sherwood products, and the R-772 is no exception. Its solid construction ensures longevity while maintaining aesthetic appeal. This model is designed to blend seamlessly with a home audio setup, offering both style and substance.

In conclusion, the Sherwood R-772 stereo receiver stands out with its powerful performance, versatile connectivity, and user-friendly features. It embodies a perfect balance of modern technology and traditional audio quality, ensuring that it remains a valuable addition to any audio system for years to come. This receiver is an excellent choice for anyone looking to enhance their listening experience, regardless of their level of audio expertise.
Top Page Image Contents