(h) Initial Setup tab

When you click the [Initial Setup] tab on the [Menu Setting] window, you can make basic settings.

[HDD]

---------- When you click the [HDD Setting] button, the [HDD Setting] window will appear. You

can make settings related to HDD repeat recording, HDD repeat playback, and IM- check playback using this window.

[Audio Recording]

---------- You can make settings related to audio recording.

[Rear Terminal]

---------- When you click the [Rear Terminal Setting] button, the [Rear Terminal Setting] window

will appear. You can make settings related to Mode Out, button tone, buzzer, HDD remaining capacity, emergency recording duration, and Call Out.

[Communication]

---------- When you click the [RS-232C Setting] button, the [RS-232C Setting] window will ap-

pear. You can make settings related to remote control of the digital recorder by a com- munication device (such as a personal computer), transfer rate, etc. using this window.

When you click the [LAN Setting] button, the [LAN Setting] window will appear. You can set the IP address, sub net mask, gateway, service port, various notifications, and retry interval of the digital recorder using this window.

[Language]

---------- You can select Japanese or English as the menu language of the digital recorder.

- 42 -

Page 42
Image 42
Mitsubishi Electronics DX-PC25EA operation manual Initial Setup tab, Hdd