Mitsubishi Electronics DX-PC25EA Introduction, Product features, System requirements

1. Introduction

Mitsubishi DX-PC25EA is viewing software designed for DX-TL2530E or DX-NT430E Digital Video Recorder (“DVR”). With this software, you can view surveillance pictures that are recorded on PC- compatible media such as Compact Flash Card, CD-R/RW, and DVD.

In combination with DX-TL2530E or DX-NT430E digital recorder, you can set and operate the recorder and load recorded pictures and the latest picture from the recorder using the communica- tion function.

1.1 Product features

-Display of pictures from all the cameras connected with the DVR

-Playback of the data recorded in FSM2 format, and playback of the recorded data that are copied to other media (within the range Microsoft Internet Explorer applies.)

-Playback of the data recorded on the SCSI copy media in FSMS2 format

-Display of the recording date and time, title, alarm type, and comment

-Comment search, date and time search, alarm index search, and alarm list display and search

-Zoom-in display of still picture

-Camera switching function, and multi-screen (16-split, 9-split, and 4-split) display function

-Printing by Windows-supported printer

-Bookmarking function, and A-B repeat playback function

-Audio playback function (except under certain conditions)

-Saving of still picture in bitmap or JPEG format, and conversion of still picture into AVI format

-Simultaneous playback during recording, latest picture loading, picture download by specifying the section (via network)

-Remote control and remote setting of the digital recorder (via network)

-PTZ camera control (via network)

-Firmware updating function (via network)

-Alarm notification receiving function

1.2 System requirements

To use DX-PC25EA, you need:

-IBM PC/AT-compatible with Intel Pentium processor or Intel Celeron processor (500 MHz or faster)

-Microsoft Windows 98SE, Windows Me, Windows 2000, or Windows XP

-RAM of 256 MB or more

-Video card and monitor with 1024 pixels by 768 lines (XGA) or more (recommended) and 32,000 colors for display

-Drive that can read CD-R discs

-Free hard disk space of 200 MB or more at the time of installation

-Free hard disk space for the swap depending on the swap size at the time of collective conversion

-SCSI adapter supporting WINASPI32 and SCSI-2 such as Adaptec AHA-2940 Series and SlimSCSI (only when SCSI-connected peripheral devices are used.)

With Windows 2000 and Windows XP, WinASPI must be installed in advance for playback on SCSI-connected devices. For installation of WinASPI, please read the instruction manual of Adaptec SCSI board.

-Windows-supported sound adaptor such as SoundBlaster

-Microsoft Internet Explorer 5.01 Service Pack 2 or later (Prior installation is required.)

-NIC that operates correctly under the condition satisfying the above-mentioned requirements (Required when the communication function is used.)

- 5 -