64 en Using the AutoDome 800 SeriesAutoDome 800 Series HD PTZ Camera

1. If you want to delete the entries, click the delete icon in the top right-hand corner of the relevant field.

2. If you want to view a detailed log, click the icon in the top right-hand corner of the relevant field. A new window will open.

6.6.1Entering a Keyboard Control Command

The Aux Control tab is used to enter keyboard control commands. These commands are composed of a command number plus the appropriate function key (Show Shot, Set Shot Aux On or Aux Off). A valid combination either issues a command to the camera or displays an on- screen menu.

Aux Control Tab

The Aux Control tab is used to enter pre-programmed keyboard control commands. See Section A Keyboard Commands by Number, page 116, for a list of all commands.

To access the Aux Control tab, navigate to the Livepage and click the Aux Control tab (see Figure 6.3 below).

Figure 6.3 Aux Control Tab

1

Command number field

2

Keypad (numbers 0-9)

3

Show a preset shot

4

Set a preset shot

5

Initiates a command

6

Deletes a number in the Command Number field

7

Used to select a menu item

8

Stops a command

To Enter a Keyboard Control Command:

1.Place the cursor in the Command Number field.

2.Click the desired command number via the on-screen keypad.

3.Click either the Aux On or the Aux Off button to initiate or stop the command.

4.If the command initiates a menu, use the Up/Down arrows on the View Control to navigate the menu. Click the Focus or Iris button to select a menu item.

To Set a Preset Shot:

Preset shots (or scenes) are camera positions that are saved in memory for future use.

1.Move your cursor over the live image and wait for the area to display a directional arrow.

2.Click and hold a mouse button to pan to the desired position you want to save.

3.Click any number combination from 1-99 from the on-screen keypad to identify the scene number.

4.Click the Set Shot button. The image area displays a message that indicates which shot number was saved.

F.01U.273.797 5.0 2012.08

Installation Manual

Bosch Security Systems, Inc.

Page 64
Image 64
Bosch Appliances VG5 800 SERIES 1Entering a Keyboard Control Command, Aux Control Tab, To Enter a Keyboard Control Command