AutoDome 800 Series HD PTZ Camera | Configuring the AutoDome 800 Series en 83 |
|
|
SD stream options (use these options if a second H.264 stream is allowed):
–H.264 BP+ bit-rate-limited
Select this setting when using hardware decoders. The bit rate is limited to 1.2 Mbps. CABAC: off
CAVLC: on
GOP structure: IP
Deblocking filter: on
–H.264 MP SD
Select this setting when using software decoders, PTZ and for rapid movements in the images.
CABAC: on
CAVLC: off
GOP structure: IP
Deblocking filter: on
To select the stream options:
1.Select the required encoder properties and one of the encoder profiles for each data stream.
2.Click the Preview button. The preview screens for both data streams are shown.
3.Click the 1:1 Live View button below the preview screen to open a new window with the original data stream and to check the image quality and the transmission rate.
Property
Select one of the H.264 standards for each stream.
NOTICE!
If you select H.264 MP 720p60 Fixed or H.264 MP 1080p Fixed as the first stream, you can select only Copy of Stream 1 as an option for the second stream.
Default profile
Select one of the following profiles for each stream:
–HD high quality / low latency
–HD high quality
–HD low bandwidth
–SD high quality / low latency
–SD high quality
–SD low bandwidth
–DSL
–ISDN (2B)
Refer to Section 7.19 Encoder Profile, page 80, for more details about each stream.
Preview
Click the Preview button to open a small static preview window for each stream. To enlarge the preview and view live video, click the 1:1 Live View button.
JPEG stream
Select the resolution, frame rate, and image quality parameters for the
–Resoltuion: Select either 4CIF/D1 or CIF.
–Frame rate: Select one of the following frame rates: 5, 10, 15, 20, 25, or 30 ips.
Bosch Security Systems, Inc. | Installation Manual | F.01U.273.797 5.0 2012.08 |
