72 en Configuring the AutoDome 800 Series

AutoDome 800 Series HD PTZ Camera

 

 

 

Select Time server for a time server that works with the protocol RFC 868.

7.3

Basic Mode: Network

The settings on this page are used to integrate the AutoDome 800 Series into an existing network.

Some changes only take effect after the unit is rebooted. In this case, the Set button changes to Set and Reboot.

1.Make the desired changes.

2.Click the Set and Reboot button. The AutoDome 800 Series is rebooted and the changed settings are activated.

CAUTION!

If you change the IP address, subnet mask or gateway address, the AutoDome 800 Series is only available under the new addresses after the reboot.

DHCP

If a DHCP server is employed in the network for the dynamic assignment of IP addresses, you can activate acceptance of IP addresses automatically assigned to the AutoDome 800 Series. Certain applications (VIDOS, Bosch Video Management System, Archive Player, Configuration Manager) use the IP address for the unique assignment of the unit. If you use these applications, the DHCP server must support the fixed assignment between IP address and MAC address, and must be appropriately set up so that, once an IP address is assigned, it is retained each time the system is rebooted.

IP address

Enter the desired IP address for the AutoDome 800 Series in this field. The IP address must be valid for the network.

Subnet mask

Enter the appropriate subnet mask for the selected IP address here.

Gateway address

If you want the unit to establish a connection to a remote location in a different subnet, enter the IP address of the gateway here. Otherwise leave the box blank (0.0.0.0).

7.4

Basic Mode: Encoder

Default profile

You can select a profile for encoding the video signal.

You can use this to adapt the video data transmission to the operating environment (for example network structure, bandwidth, data load).

Pre-programmed profiles are available, each giving priority to different perspectives. When selecting a profile, details are displayed in the list field.

HD high quality / low latency Target bit rate: 5000 kbps Maximum bit rate: 10000 kbps Encoding interval: 30.00 ips

HD high quality

Target bit rate: 3500 kbps

Maximum bit rate: 7000 kbps

Encoding interval: 30.00 ips

F.01U.273.797 5.0 2012.08

Installation Manual

Bosch Security Systems, Inc.

Page 72
Image 72
Bosch Appliances VG5 800 SERIES installation manual Basic Mode Network, Basic Mode Encoder