
28 en Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts | AutoDome 800 Series HD PTZ Camera |
|
|
Figure 2.13 Pendant Arm Cables
Cable | Cable | Cable | Cable |
1 | Grounding Strap (black) | 5 | Ethernet Video and Control (blue) |
2 | 24 VAC Power (red) | 6 | Alarm Outputs (white) |
3 | Relay Contacts (yellow) | 7 | Alarm Inputs (gray) |
| (not used) |
|
|
|
|
|
|
4 | Coax Video (black) | 8 | Audio In (green) |
| (not used) |
|
|
|
|
|
|
1.Route all incoming wires through one of the conduits at the bottom of the Mounting Plate. For a mast mount, route all wires through the
2.Attach the
3.Attach the grounding spade terminal (item 1, below) to one of the spade terminals inside the Mounting Plate.
F.01U.273.797 5.0 2012.08 | Installation Manual | Bosch Security Systems, Inc. |