AutoDome 800 Series HD PTZ Camera | Installing Roof Parapet and Pipe Mounts en 49 |
|
|
1Interface Board
2Retaining Screws (3)
3Pendant Mounting Screws (2)
3.8 | Attach Pendant to Pipe and Tighten |
CAUTION!
The bubble is packaged with a protective plastic sheet. It is recommended that the bubble remain stored this way until it is ready to install. Limit handling the bubble, as any scratches can quickly affect visibility.
1.Before attaching the Pendant, visually inspect the Pendant dome and the Interface Board connectors for any blocked pin holes and bent pins.
2.Tilt the Pendant enough to place its mounting hook on top of the its housing, over the recessed hinge pin of the Dome Cap.
a
b
c
Figure 3.13 Pendant to Roof / Pipe Mount Attachment
1Tilt Dome.
2Hook and drop.
2a Dome Cap
2b Recessed Hinge Pin
2c Dome Connector
Bosch Security Systems, Inc. | Installation Manual | F.01U.273.797 5.0 2012.08 |
