Bosch Appliances VG5 800 SERIES Cable and Wire Standards, Power, Wire Distance Guide for Pendant

AutoDome 800 Series HD PTZ Camera						Cable and Wire Standards en 51
4	Cable and Wire Standards
4.1	Power
		115/230 VAC
		Copper Wire	To comply with local codes.
4.2	Wire Distance Guide for Pendant
		24 V to AutoDome
				VA / Watts	14 AWG (2.5 mm)	16 AWG (1.5 mm)	18 AWG (1.0 mm)
		800 Series with IVA, Outdoor		60 / 55	58 m (190 ft)	36 m (119 ft)	23 m (75 ft)
		Table 4.1 Maximum Wire Distances from Power Supply to AutoDome
4.3	Video and Control Cables

Ethernet

The AutoDome 800 Series models are connected to a 10/100 Base-T network either directly or via a hub. Both video and control are transmitted over a standard TCP/IP network using the built-in web server.

CAUTION!

Ethernet connections must be made to non-exposed (indoor) networks only.

Cable Type	UTP CAT-5
Maximum Distance	100 m (328 ft)
Bandwidth	10/100 Base-T
Terminal Connector	RJ45

Fiber Optic Ethernet Media Converter

The fiber optic media converter is designed to transmit 10/100 Mbps Ethernet signals over fiber optic cable using 10/100 Mbps Small Form-factor Pluggable (SFP) modules. The SFP modules are available as multi-mode fiber (MMF) or single-mode fiber (SMF) models with a single SC connector or dual-fiber with an LC connector. Refer to the VG4-SFPSCKT Fiber Optic Media Converter Installation Guide.

Ethernet Media Converter

Data Interface	Ethernet
Data Rate	10/100 Mbps
	IEEE 802.3 Compliant
	Full Duplex or Half Duplex Electrical Port
	Full Duplex Optical Port
Fiber Type, MMF	50/125 µm MMF. For 50/125 µm fiber, subtract 4 dB from the
	specified optical budget value. Must meet or exceed fiber standard
	ITU-T G.651.

Bosch Security Systems, Inc. Installation Manual F.01U.273.797 5.0 2012.08