78 en Configuring the AutoDome 800 Series

AutoDome 800 Series HD PTZ Camera

 

 

Website language

Select the language for the user interface here.

Company logo

Enter the path to a suitable graphic if you want to replace the manufacturer's logo. The image file can be stored on a local computer, in the local network or at an Internet address.

Device logo

Enter the path to a suitable graphic if you want to replace the product name. The image file can be stored on a local computer, in the local network or at an Internet address.

NOTICE!

If you want to use the original graphics again, simply delete the entries in the Company logo and Device logo fields.

JPEG interval

You can specify the interval at which the individual images should be generated for the M- JPEG image on the LIVEPAGE.

7.15Livepage Functions

On this page you can adapt theLivepage functions to your requirements. You can choose from a variety of different options for displaying information and controls.

1.Check the box for the items that are to be made available on the Livepage. The selected items are indicated by a check mark.

2.Check whether the required functions are available on the Livepage.

Transmit Audio

You can only select this option if audio transmission is actually switched on (see

Section 7.30 Audio, page 90).The audio signals are sent in a separate data stream parallel to the video data, and so increase the network load. The audio data are encoded according to G.711 and require an additional bandwidth of approx. 80 kbps for each connection.

Lease time (s)

The lease time in seconds determines the time beyond which a different user is authorized to control the camera after no further control signals are received from the current user. After this time interval, the camera is automatically enabled.

Show alarm inputs

The alarm inputs are displayed next to the video image as icons along with their assigned names. If an alarm is active, the corresponding icon changes color.

Show relay outputs

Relay outputs are shown next to the video image as icons, along with their assigned names. If the relay is switched, the icon changes color.

Show VCA trajectories

When video content analysis (VCA) is activated, check this item to show additional information that traces the path of objects.

Show VCA metadata

When video content analysis (VCA) is activated, additional information is displayed in the live video stream. For example, in Motion+ mode, the sensor areas for motion detection are marked.

F.01U.273.797 5.0 2012.08

Installation Manual

Bosch Security Systems, Inc.

Page 78
Image 78
Bosch Appliances VG5 800 SERIES installation manual Livepage Functions