48 en Installing Roof Parapet and Pipe Mounts | AutoDome 800 Series HD PTZ Camera |
|
|
WIRE
1WHITE
2BROWN
3ORANGE
4GREEN
WIRE
1WHITE
2BROWN
3ORANGE
4GREEN
5YELLOW
6BLUE
Figure 3.11 Alarm and Relay Connector Plugs
1 |
| 2 | |||
Wire | Color | Description | Wire | Color | Description |
1 | White | Not used | 1 | White | Alarm Input 1 (A3) |
2 | Brown | Not used | 2 | Brown | Alarm Input 2 (A4) |
3 | Orange | Relay Out 1 | 3 | Orange | Not used |
4 | Green | Relay Ground | 4 | Green | Not used |
|
|
| 5 | Yellow | Not used |
|
|
| 6 | Blue | Alarm Ground (AGND) |
|
|
|
|
|
|
Note: There is a slot located at the top of the Interface Board to tie the wires to the circuit board with a cable tie.
5.Insert the Pipe Interface Board into the down pipe and fasten the three (3) retaining screws to secure the board to the Dome Cap.
CAUTION!
Be careful not to strip the threads when tightening the Pipe Interface Board retaining screws.
Figure 3.12 Pipe Interface Board to Dome Cap Assembly
F.01U.273.797 5.0 2012.08 | Installation Manual | Bosch Security Systems, Inc. |
