Bosch Appliances VG5 800 SERIES Pin Alarm Output Flying Lead Pin Alarm Input Flying Lead

18 en Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts AutoDome 800 Series HD PTZ Camera

4.Attach the supplied 3-pin Power Plug to the incoming power wires. See connector P101 in Table 2.1, Page 20, for wire connections.

5.Attach an RJ45 plug to the incoming Ethernet cable. If installing a Fiber Optic model, attach an ST fiber plug to the optic fiber cable. See Section 4 Cable and Wire Standards, page 51, for the different methods of transmitting video and control protocols, and wire specifications.

6.If you are connecting alarm inputs and relay outputs, attach the supplied 4-wire Alarm Output and the 6-wire Alarm Input flying leads to the appropriate relay and alarm wires.

WIRE

1WHITE

2BROWN

3ORANGE

4GREEN

WIRE

1WHITE

2BROWN

3ORANGE

4GREEN

5YELLOW

6BLUE

Figure 2.3 Alarm and relay connectors

1	4-pin Alarm Output Flying Lead		2	6-pin Alarm Input Flying Lead
Wire	Color	Description	Wire	Color	Description
1	White	Not used	1	White	Alarm Input 1 (A3)
2	Brown	Not used	2	Brown	Alarm Input 2 (A4)
3	Orange	Relay Out 1	3	Orange	Not used
4	Green	Relay Ground	4	Green	Not used
			5	Yellow	Not used
			6	Blue	Alarm Ground (AGND)

F.01U.273.797 5.0 2012.08 Installation Manual Bosch Security Systems, Inc.