26 en Installing the Pendant Arm Wall, Corner, and Mast (Pole) MountsAutoDome 800 Series HD PTZ Camera

2.8

Installing the VG4-A-ARMPLATE

 

This section provides instructions to install a wall, corner, or mast mount with the VG4-A-

 

ARMPLATE Mounting Plate instead of a Power Supply Box.

 

 

 

CAUTION!

 

You must route the main power supply through a 120/230 VAC transformer (VG4-PSU1 or

 

VG4-PSU2 power supply box) before connecting the power to a 24 VAC AutoDome.

 

 

 

 

 

WARNING!

 

A stud diameter of 6.4 mm (1/4 inch) to 8 mm (5/16 inch) able to withstand a 120 kg (265 lb)

 

pull-out force is recommended. The mounting material must be able to withstand this pull out

 

force. For example, 19-mm (3/4-inch) minimum for plywood.

 

 

 

1. For a Corner installation:

 

a.

Secure the Corner Plate to the wall corner using four (4) studs (not included).

 

b.

Secure the Mounting Plate to the Corner Plate using the four (4) 3/8 x 1-3/4-inch

 

 

bolts and split lock washers (supplied).

 

2. For a Mast or pole installation:

 

The metal straps included with the Mast mount accommodate a pole with a diameter of

 

100–380 mm (4–15 in.). You must use a banding tool (sold separately) for a mast or pole

 

installation. In addition, you must obtain a 3/4 in. (20-mm) right angle conduit connector

 

through which you route the wires that connect to the pendent arm.

 

a.

Follow the instructions provided with the banding tool to securely mount the Mast

 

 

Plate to the pole. Contact your Bosch Sales Representative to order Banding Tool

 

 

P/N TC9311PM3T.

 

b.

Secure the Mounting Plate to the Mast Plate using the four (4) 3/8 x 1-3/4-inch bolts

 

 

and split lock washers (supplied).

 

c.

Remove one of the rubber gaskets from the Mounting Plate.

 

d.

Once the Mounting Plate (item 1, below) is attached to the Mast Plate (item 2),

 

 

connect the right angle conduit (item 3) to the Mounting Plate through the empty

 

 

conduit hole as shown below:

F.01U.273.797 5.0 2012.08

Installation Manual

Bosch Security Systems, Inc.

Page 26
Image 26
Bosch Appliances VG5 800 SERIES Installing the VG4-A-ARMPLATE, For a Corner installation, For a Mast or pole installation