92 en Configuring the AutoDome 800 Series | AutoDome 800 Series HD PTZ Camera |
|
|
storage media list. In the Status column, newly added media are indicated by the status
Not active.
3.Click the Set button to activate all media in the Managed storage media list. In the Status column, these are indicated by the status Online.
4.Check the box in the Rec. 1 or Rec. 2 to specify which data stream should be recorded on the storage media selected. Rec. 1 stores Stream 1, Rec. 2 stores Stream 2. This means that you can record the standard data stream on a hard drive and record alarm images on the mobile CF card, for example.
5.Check the boxes for the Overwrite older recordings option to specify which older recordings can be overwritten once the available memory capacity has been used. Recording 1 corresponds to Stream 1, Recording 2 corresponds to Stream 2.
CAUTION!
If older recordings are not allowed to be overwritten when the available memory capacity has been used, the recording in question will be stopped. You can specify limitations for overwriting old recordings by configuring the retention time (see Section 7.35 Retention Time, page 94).
Formatting Storage Media
You can delete all recordings on a storage medium at any time.
CAUTION!
Check the recordings before deleting and back up important sequences on the computer's hard drive.
1.Click a storage medium in the Managed storage media list to select it.
2.Click the Edit button below the list. A new window will open.
3.Click the Formatting button to delete all recordings in the storage medium.
4.Click OK to close the window.
Deactivating Storage Media
You can deactivate any storage medium from the Managed storage media list. It is then no longer used for recordings.
1.Click a storage medium in the Managed storage media list to select it.
2.Click the Remove button below the list. The storage medium is deactivated and removed from the list.
7.34Recording Profiles
You can define up to ten different recording profiles. You will then use these recording profiles in the recording scheduler, where they are linked with the individual days and times (see Section 7.36 Recording Schedule, page 94).
NOTICE!
You can change or add to the recording profile description on the tabs on the Recording Scheduler page (see Page 94).
1.Click one of the tabs to edit the corresponding profile.
2.If necessary, click the Default button to return all settings to their default values.
3.Click the Copy Settings button if you want to copy the currently visible settings to other profiles. A new window will open and you can select the profiles in which you want to copy the settings.
4.For each profile, click the Set button to save the settings in the unit.
F.01U.273.797 5.0 2012.08 | Installation Manual | Bosch Security Systems, Inc. |
