Bosch Appliances VG5 800 SERIES installation manual

30 en Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts AutoDome 800 Series HD PTZ Camera

12.Connect the Earth ground wire, if available, to the crimp ring terminal inside the Mounting Plate. Refer to Figure 2.14 above.

Note: The Earth ground is not provided with the VG4-A-ARMPLATE kit; it is a ground connection made at the installed location.

13.After making the harness connections to the Mounting Plate, rotate the Pendant Arm to close and tighten the two (2) captive screws to 10-12 N-m (90-105 in.-lbs).

14.Refer to Section 2.9 Attach Pendant to Arm and Tighten, page 31, to continue the AutoDome Installation procedure.

NOTICE! After all wiring is complete, close the cover door and tighten the two (2) captive screws on the cover door to 10-12 N-m (90-105 in.-lbs).

F.01U.273.797 5.0 2012.08 Installation Manual Bosch Security Systems, Inc.