56 en Using the AutoDome 800 SeriesAutoDome 800 Series HD PTZ Camera
6 | Using the AutoDome 800 Series | ||
|
| The AutoDome 800 Series transmits PTZ control commands and images over a TCP/IP | |
|
| network. It also allows users to configure the camera display settings, camera operating | |
|
| settings, and to configure the network parameters. | |
|
| The IP unit incorporates a network video server in the IP module. The primary function of the | |
|
| server is to encode video and control data for transmission over a TCP/IP network. With its | |
|
| H.264 encoding, it is ideally suited for IP communication and for remote access to digital | |
|
| video recorders and multiplexers. The use of existing networks means that integration with | |
|
| CCTV systems or local networks can be achieved quickly and easily. Video images from a | |
|
| single camera can be simultaneously received on several receivers. | |
|
| Refer to Section 9 BVIP Firmware Updates, page 115, for firmware upgrade instructions. | |
6.1 | Overview of Features | ||
|
| The AutoDome 800 Series includes the following functionality: | |
|
|
|
|
|
| Function | Description |
|
|
|
|
|
| Video Encoding | The camera uses the H.264 compression standards and ensures that the |
|
|
| data rate remains low even with high image quality and can also be |
|
|
| adapted to local conditions within wide limits. |
|
|
|
|
|
| Streaming | Encodes multiple data streams simultaneously according to individually |
|
|
| customized profiles. This feature creates data streams that can serve |
|
|
| different purposes. For example, one (1) data stream for recording and |
|
|
| one (1) data stream optimized for transmission over the Local Area |
|
|
| Network (LAN). |
|
|
|
|
|
| Multicast | Enables simultaneous, |
|
|
| network must implement the UDP and IGMP V2 protocols as a |
|
|
| prerequisite for Multicasting. |
|
|
|
|
|
| Configuration | Allows configuration for all camera settings from a Web browser on the |
|
|
| local network (Intranet) or on the Internet. You can also update the |
|
|
| firmware, load device configurations, store configuration settings, and |
|
|
| copy these settings from one camera to another. |
|
|
|
|
|
| Snapshots | Allows you to take and store individual video frames as JPEG images from |
|
|
| the Web browser interface. |
|
|
|
|
|
| Record | Allows configuration for the recording options of the IP module. You can |
|
|
| record video from the Livepage to a hard drive or you can opt to store up |
|
|
| to 8 MB of video on the IP module. |
|
|
|
|
6.2 | System Requirements | ||
|
| The AutoDome 800 Series requires specific software and hardware to allow a user to view live | |
|
| images and to configure camera settings over a TCP/IP network. These requirements are: | |
– A computer with the Microsoft Windows XP, Vista, or Windows 7 operating system, network access, and the Microsoft Internet Explorer Web browser version 7.0 or later, or
– A computer with Microsoft Windows XP, Vista, or Windows 7 operating system, network access, and reception software such as the Bosch Video Management System or a Bosch recording solution, or
– A compatible hardware decoder from Bosch Security Systems as a receiver and a connected video monitor.
F.01U.273.797 5.0 2012.08 | Installation Manual | Bosch Security Systems, Inc. |
