94 en Configuring the AutoDome 800 Series | AutoDome 800 Series HD PTZ Camera |
|
|
7.35Retention Time
You can specify the retention times for recordings. If the available memory capacity of a medium has been used, older recordings are only overwritten if the retention time entered here has expired.
NOTICE!
Make sure that the retention time corresponds with the available memory capacity. A rule of thumb for the memory requirement is as follows: 1 GB per hour retention time with 4CIF for complete frame rate and high image quality.
Retention time
Enter the required retention time in hours or days for each recording. Recording 1 corresponds to Stream 1, Recording 2 corresponds to Stream 2.
7.36Recording Schedule
The recording scheduler allows you to link the created recording profiles with the days and times at which the camera's images are to be recorded in the event of an alarm.
You can link any number of
In addition to the normal weekdays, you can define holidays that are not in the standard weekly schedule on which recordings are to apply. This allows you to apply a schedule for Sundays to other days with dates that fall on varying weekdays.
1.Click the profile you want to link in the Time periods field.
2.Click in a field in the table, hold down the mouse button and drag the cursor over all the periods to be assigned to the selected profile.
3.Use the right mouse button to deselect any of the intervals.
4.Click the Select All button to link all time intervals to the selected profile.
5.Click the Clear All button to deselect all of the intervals.
6.When you are finished, click the Set button to save the settings in the unit.
Holidays
You can define holidays that are not in the standard weekly schedule on which recordings are to apply. This allows you to apply a schedule for Sundays to other days with dates that fall on varying weekdays.
1.Click the Holidays tab. Any days that have already been selected will be shown in the table.
2.Click the Add button. A new window will open.
3.Select the desired date from the calendar. You can select several consecutive calendar days by holding down the mouse button. These will later be displayed as a single entry in the table.
4.Click OK to accept the selection. The window will close.
5.Assign the individual holidays to the recording profiles, as described above.
Deleting Holidays
You can delete holidays you have defined yourself at any time.
1.Click the Delete button. A new window will open.
2.Click the date you wish to delete.
3.Click OK. The item will be deleted from the table and the window will close.
4.The process must be repeated for deleting additional days.
F.01U.273.797 5.0 2012.08 | Installation Manual | Bosch Security Systems, Inc. |
