Bosch Appliances VG5 800 SERIES Configuring Intelligent Tracking, 1Intelligent Tracking Operation

60 en Using the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera

NOTICE!

Click the Help on this page? link if you need more information.

	8.	Click the Set button to save the settings.
	9.	Launch another instance of Microsoft Internet Explorer.
	10.	Type the original IP address followed by /reset (for example, http://192.168.0.1/reset) in
		the address bar and click Go to restart the AutoDome 800 Series. Once you restart the
		AutoDome 800 Series, use the new IP Address to access the Livepage.
	11.	Disconnect the AutoDome 800 Series Ethernet cable from the dedicated network switch
		and reconnect the Ethernet cable to the local area network (LAN).
6.5	Configuring Intelligent Tracking

The AutoDome utilizes the built-in Intelligent Video Analytics (IVA) to continuously follow an individual or object even if it passes behind a Privacy Mask or a stationary object. The AutoDome uses objects detected by IVA in a stationary preset position to activate the Intelligent Tracking feature. Intelligent Tracking controls the pan/tilt/zoom actions of the camera to keep the selected object in the scene.

To activate the Intelligent Tracking feature, one of the following conditions must be met:

–The Silent IVA option must be selected in the VCA page on the Settings tab. Refer to Section 7.40 VCA, page 97.

–IVA must be active for at least one preset scene in the VCA page on the Settings tab. If IVA is configured for one scene, then all other scenes have Intelligent Tracking enabled by default. If a scene, however, has Motion+ of IVA Flow activated then the Intelligent Tracker is disabled for these scenes.

NOTICE!

The following actions occur if Intelligent Tracking is active:

– All other IVA objects are disabled in scenes with Intelligent Tracking.

–The camera automatically disables the display of compass headings. Refer to Page 88 for details of the Compass feature.

6.5.1Intelligent Tracking Operation

The Intelligent Tracking feature behaves in one of the following ways:

– A user controls the pan/tilt/zoom while the AutoDome is in Intelligent Tracking mode. User actions always take precedence over Intelligent Tracking. If the AutoDome is actively tracking an object and a user takes control, the AutoDome will attempt to track the object after a period of inactivity.

– An IVA alarm can trigger Intelligent Tracking to track a detected object.

A rule that triggers an IVA event must be set. The following standard tasks can be set Object in field, Crossing Line, Loitering, Condition change, Following route, Entering field, and Leaving field. Refer to the Intelligent Video Analysis Operation Guide for complete details about using IVA.

– A user manually selects an object in the live image area to track.

Intelligent Tracking allows a user to click a moving object in the live image display inside the Livepage to identify an object to track.

F.01U.273.797 5.0 2012.08 Installation Manual Bosch Security Systems, Inc.