
AutoDome 800 Series HD PTZ CameraBVIP Firmware Updates en 115
9 | BVIP Firmware Updates | |
| The AutoDome 800 Series incorporate a network video server in the IP module. The primary | |
| function of the server is to encode video and control data for transmission over a TCP/IP | |
| network. The AutoDome 800 Series also allows an operator to update the BVIP firmware via | |
| the TCP/IP network. | |
| The latest BVIP firmware is available on the Bosch Security Systems Web site. To download | |
| the service pack from the Web, navigate to www.boschsecurity.us, click the CCTV link, then | |
| click Cameras, PTZ and navigate to the product page for the AutoDome 800 Series. Then click | |
| the Software tab on the product page. | |
9.1 | Upgrading the AutoDome 800 Series | |
| The preferred method to update an AutoDome 800 Series is through a direct connection | |
| between the camera and a PC. This method entails connecting the Ethernet cable from the | |
| camera directly to the Ethernet port of a PC. | |
| If the | |
| through a Local Area Network (LAN). You cannot, however, update the AutoDome 800 Series | |
| through a Wide Area Network (WAN) or via the Internet. | |
9.2 | Beginning the Firmware Update Process | |
| Use this procedure to connect to your AutoDome 800 Series and to navigate to the Firmware | |
| Update page. | |
| 1. | Launch Internet Explorer and type the IP address for the AutoDome 800 Series in the |
|
| Address bar and click Go. |
|
| Internet Explorer opens the Livepage view. |
| 2. | Click the SETTINGS link, located at the top of the page. |
| 3. | Click the Service link in the left pane. |
| 4. | Click the Maintenance link below the Service link. |
| 5. | Click the Search button and navigate to the firmware file (*.fw). Then, click OK. |
| 6. | Click the Upload button. |
| 7. | Click OK to the warning message to continue the firmware upload, or Cancel to stop the |
|
| upload. |
|
| The page displays a progress bar as the firmware is uploaded. |
|
| Note: Once the progress bar reaches 100% the system opens the reset page. Allow the |
|
| reset page to complete its action. |
| 8. | Once the reset is complete the upgrade is complete. |
Bosch Security Systems, Inc. | Installation Manual | F.01U.273.797 5.0 2012.08 |