
AutoDome 800 Series HD PTZ Camera | Configuring the AutoDome 800 Series en 87 |
|
|
Iris Polarity
Capability to reverse the operation of the iris button on the controller.
–Normal (default): iris controls operate normally.
–Reverse: iris controls are reversed.
Auto Iris Level
Increases or decreases brightness according to the amount of light. Type a value between 1 and 15, inclusive. The default setting is 5.
Maximum Zoom Speed
Controls the zoom speed. The default setting is Fast.
Zoom Polarity
Capability to reverse the operation of the zoom button on the controller.
–Normal (default): zoom controls operate normally.
–Reverse: zoom controls are reversed.
Digital Zoom
Digital zoom is a method of decreasing (narrowing) the apparent angle of view of a digital video image. It is accomplished electronically, without any adjustment of the camera's optics, and no optical resolution is gained in the process. Select Off to disable or On to enable this feature. The default setting is On.
7.24PTZ Settings
Auto Pan Speed
Pans the camera at the selected speed between right and left limit settings or 360°. Type a value between 1 and 60 (expressed in degrees), inclusive. The default setting is 30.
Inactivity
Selects the time period the dome must be not controlled until the inactivity event will be executed.
–Off (default): camera remains on a current scene indefinitely.
–Scene 1: camera returns to Preset 1.
–Previous Aux: camera returns to the previous activity.
Inactivity Period
Determines the behavior of the dome when the control for dome is inactive. Select a time period from the
Auto Pivot
The Auto Pivot tilts the camera through the vertical position as the camera is rotated to maintain the correct orientation of the image. Set the Auto Pivot to On (default) to automatically rotate the camera 180º when following a subject traveling directly beneath the camera. To disable this feature, click Off.
Freeze Frame
Select On (default) to freeze the image while the AutoDome moves to a predetermined scene position.
Autopan Left Limit
Sets the left Auto Pan limit of the camera. Use the preview window to move the camera to the left pan limit and click the button. The camera will not move past this limit when in Auto Pan Between Limits mode (AUX 2 ON).
Bosch Security Systems, Inc. | Installation Manual | F.01U.273.797 5.0 2012.08 |