Error messages

Table 2. Numeric error codes (continued)

Symptom or error	FRU or action, in sequence

201x	Inform the following information to the customer: If the
The solid state drive you have installed has not passed	customer is using a non qualified SSD which is not
qualification for use in this computer. Using this drive may	supported by this system, with the risk in mind, the
cause compatibility issues and potential issues with data	customer can still use it by pressing ESC. Location of the
integrity, including data loss. Press <Esc> to continue.	SSD is designated as below:
		2010: HDD0 (in HDD slot-0)
		2011: HDD1 (in HDD slot-1)
		2012: Ultrabay with HDD adapter

2100	1.	Reseat the hard disk drive.
Initialization error on HDD0 (Main hard disk drive)	2.	Main hard disk drive.
	3.	System board.

2102	1.	Reseat the hard disk drive.
Initialization error on HDD1 (Ultrabay hard disk drive)	2.	Ultrabay™ hard disk drive.
	3.	System board.

2110	1.	Reseat the hard disk drive.
Read error on HDD0 (Main hard disk drive)	2.	Main hard disk drive.
	3.	System board.

2112	1.	Reseat the hard disk drive.
Read error on HDD1 (Ultrabay hard disk drive)	2.	Ultrabay hard disk drive.
	3.	System board.

Table 3. Error messages

Symptom or error	FRU or action, in sequence

Device address conflict.	1.	Load “Setup Defaults” in the BIOS Setup Utility.
	2.	Backup battery.
	3.	System board.

Allocation error for device.	1.	Load “Setup Defaults” in the BIOS Setup Utility.
	2.	Backup battery.
	3.	System board.

Failing bits: nnnn.	1.	DIMM.
	2.	System board.

Invalid system configuration data.	1.	DIMM.
	2.	System board.

I/O device IRQ conflict.	1.	Load “Setup Defaults” in the BIOS Setup Utility.
	2.	Backup battery.
	3.	System board.

Hibernation error.	1.	Restore the system configuration to what it was
		before the computer entered hibernation mode.
	2.	If memory size has been changed, re-create the
		hibernation file.

Fan error.	1.	Fan.
	2.	Thermal grease.
	3.	System board.

Lenovo W510, T510I manual Error messages