1

Figure 6. Removing Power Supply Filler Panel

Connecting the Power Supplies

Before connecting the power cords:

Make sure that all of the power supplies are seated firmly, with the captive screws tightened.

Make sure that all of the ON/OFF switches on the power supplies are OFF. (O)

If you are using multiple power supplies to ensure redundancy, make sure that there is a dedicated power circuit available for each supply. The separate power sources help ensure operation when the power source itself fails.

To connect the power supplies:

1.Plug the power cord into each power supply (Figure 5).

2.Plug the power cord into an AC outlet.

1 - 12

Cajun P880 Routing Switch Installation Guide

Page 22
Image 22
Motorola P880 manual Connecting the Power Supplies, Removing Power Supply Filler Panel