Motorola P880 manual Configuring Non-VLAN Switch Port Parameters

2

8.Use Table15 to configure your switch VTP Snooping parameters.

Table 15. VTP Snooping Parameters

Parameter	Definition
VTP Snooping	Select to enable or disable the VTP snooping
State	protocol globally for the switch. The default value
	is Disabled.
Domain	Enter the name associated with the Cisco VTP
Name	domain. The default is Null.
	Note: The domain name is automatically
	learned within approximately five
	minutes from a Cisco VTP switch provided
	both the Domain Name is Null and the
	VTP Snooping State is enabled on the
	Cajun switch.
Configuration	Displays the VTP snooping configuration revision
Revision	number associated with the last successful VTP
Number	configuration update on the Cajun switch.
Updater	Displays the IP address of the Cisco switch that
Identity	initiated the configuration update.
Update	Displays the date and time that the Cisco switch
Timestamp	initiated the configuration update.

9.Click APPLY to save your changes, or CANCEL to restore previous settings.

Configuring Non-VLAN Switch Port Parameters

To configure Non-VLAN switch port parameters:

1.In the Switch Port Configuration dialog box, from the Allow Learning pull-down menu, select Disable to stop the port’s learning of new addresses. This feature can be useful for security. Selecting Enable allows the port to learn new addresses.

For example, you can set this parameter to Disable, then add a static MAC address entry for this port.

2.From the Hunt Group pull-down menu, select a hunt group for which this port will be a member. Refer to “Using Hunt Groups to Aggregate Bandwidth between Switches”, in the Cajun P550/P220 Switch Operation Guide, for more information on hunt groups.

2 - 24 Cajun P880 Routing Switch Installation Guide