Motorola P880 manual Distances, 1000BASE-LX 1000BASE-SLX

	Table 2.	Cable Pinouts
Pinout to 10Base-T Cables		Pinout for RS-232 DB-9
		Female Console Port
Pin #	Signal	Pin #	Signal
	Description		Description
1	Receive data (+)	1	DCD (output)
2	Receive data (-)	2	TX (output)
3	Transmit data (+)	3	RX (input)
4	Not used	4	DTR (input)
5	Not used	5	SGD (ground)
6	Transmit data (-)	6	DSR (not used)
7	Not used	7	RTS (not used)
8	Not used	8	CTS (output)
N/A	N/A	9	RI (not used)

Recommended Cable * Note: The following guidelines are based on IEEE 802.3z Draft

Distances	Document, version 3.2.
		Table 3. Gigabit Fiber Cable Distances
	Standard	Fiber	Diameter	Modal	Minimum
		Type	(microns)	Bandwidth	Range
				(MHz*km)	(meters)
	1000BASE-SX	MM	62.5	160	2 to 220*
	1000BASE-SX	MM	62.5	200	2 to 275**
	1000BASE-SX	MM	50	400	2 to 500
	1000BASE-SX	MM	50	500	2 to 550***
	1000BASE-LX	MM	62.5	500	2 to 550#
	1000BASE-LX	MM	50	400	2 to 550#
	1000BASE-LX	MM	50	500	2 to 550
	1000BASE-LX	SM	9	NA	2 to 5000
	1000BASE-SLX	SM	9	NA	2 to 10000

*The TIA 568 building wiring standard calls for 160/500 MHz*km multimode fiber.

**The international ISO/IEC 11801 building wiring standard calls for 200/500 MHz*km multimode fiber.

***The ANSI Fibre Channel specification calls for 500/500 MHz*km 50 micron

multimode fiber and 500/500 fiber will be proposed for addition to ISO/IEC 11801.

# Subject to DMD distortion - be sure to use Offset Cabling.

Cajun P880 Routing Switch Installation Guide 1 - 15